Printing Directly From The Measurement Mode; Printout Examples (Measurement Mode) - Kanomax ANEMOMASTER A031 Operation Manual

7.1.2 Printing Directly from the Measurement Mode

Procedure for printing directly from the measurement mode will be described below taking an example of an
operation in the "Air Velocity / Air Temperature Measurement Mode".
Display
①
②
③

7.1.3 Printout Examples (Measurement Mode)

Air Velocity /
Air Temperature
EXAMPLE:
Vel 0.15m/s Temp
Hold the reading by pressing the
Press the
While printing,
When printing is complete, the screen will return to the measurement
screen with the reading held. Measurement can be resumed by
releasing the hold mode.
Measurement Modes
Volumetric Flow /
Air Temperature
EXAMPLE:
(When duct shape is Rectanglular.)
o
C
21.8
Duct Shape R Size 2550*2550mm
FlowRate 407.3 m3/h Temp 22.5
EXAMPLE:
(When duct shape is Circular.)
Duct Shape C Size 2550mm
FlowRate 407.3m3/h Temp 23.6
Description
sign will be displayed at the upper right part of the LCD screen.
key to execute printing.
will be displayed on the screen.
o
o
20
key.
Pressure /
Air Temperature
EXAMPLE:
Press 1.03 KPa Temp
C
C
o
C
20.1