Menu; Measurement Mode - Kanomax 3443 Operation Manual

3. Display Description and operation Procedure

3.4 MENU

<Operation>
[MENU] Key:
[▲][▼] Key:
[SET] Key:

3.4.1 Measurement Mode

Press [MENU] key on the initial screen to display the menu screen.
On the menu screen you can select the followings;
MODE: Measurement Mode
CALCULATION: Calculation Mode
DATA DISPLAY
DATA CLEAR
CALIBRATION
UTILITY
To go back to the initial screen
To move the cursor up and down
To display the screen that is indicated by the cursor
Select "MODE" on the menu screen to display the screen shown on the
left.
On this screen, select one measurement mode out of three options.
The options are;
STD. SET:
FREE SET:
MANUAL:
Move the cursor up and down by using [▲] [▼] keys, and select the item
by pressing [SET] key.
* Please note that unless you press [SET] key when [SAVE INFO] is
pointed at by [►] on the setting screen of the each mode, setting will
not be saved.
To set a measurement mode => 3.4.1 Measurement Mode
To set calculation mode and to start a measurement
=> 3.4.2 Calculation Mode
To display measurement data saved in the memory of the
instrument on the screen
=> 3.4.3 Data Display
To delete measurement data saved in the memory of the
instrument
=> 3.4.4 Deleting Data
To perform background adjustment and sensitivity
adjustment
=> 3.4.5 Calibration
To perform cleaning and calibration and to configure each
setting
=> 3.4.6 Utility
Standard Mode
Free Setting Mode
Manual Mode
12