Tr-069 Client - D-Link DIR-822 User Manual

Section 4 - Configuration
On the TR-069 Client page, you can configure the router for communication
with a remote Auto Configuration Server (ACS). The TR-069 client is used for
remote monitoring and management of the device.

TR-069 Client

Select the interface over which the client should operate.
Interface:
Toggle this switch to enable or disable TR-069.
Enable TR-069
client:
Auto Configuration Server Settings
Toggle this switch to enable or disable getting the URL address via
Get URL address
DHCP.
via DHCP:
Specify the URL of your ISP's ACS.
URL address:
Specify the username for your ISP's ACS.
Username:
Specify the password for your ISP's ACS.
Password:
Inform Settings
Toggle this switch to enable active contact with your ISP's ACS.
Enable:
Specify the interval in seconds for each inform packet.
Interval:
D-Link DIR-822 User Manual
TR-069 Client
96