D-Link DIR-822 User Manual page 52

Section 4 - Configuration
Choose L2TP (Layer 2 Tunneling Protocol) if your Internet Service Provider
(ISP) uses a L2TP connection. Your ISP will provide you with a username and
password.
General Settings
Select your connection type.
Connection Type:
Enter name for your connection.
Connection Name:
Toggle this switch to enable the connection. This is enabled by default.
Enable
Disabling this feature may disable your Internet connection.
Connection:
Toggle this switch to enable Network Address Translation (NAT). This
NAT:
setting is enabled by default.
Toggle this switch to enable WAN Ping. This setting is disabled by
Ping:
default.
PPP
Enable this setting to connect without a username and password.
Without
authorization: This configuration is uncommon and is disabled by default.
If Without authorization is disabled, specify the PPP username
Username:
provided by your ISP.
If Without authorization is disabled, specify the PPP password
Password:
provided by your ISP.
Specify the VPN server address provided by your ISP.
VPN Server
address:
D-Link DIR-822 User Manual
L2TP
48