Additional 5 Ghz - D-Link DIR-822 User Manual

Section 4 - Configuration
Specify the channel bandwidth. Choose from Auto, 20 MHz, 20/40
Bandwidth:
MHz or 20/40/80 MHz.
Specify the routers transmission power in percentage. Choose from
TX Power (in
100, 75, 50, 25, 10.
percent):
Toggle to enable or disable.
Enable DFS:
Toggle to enable or disable.
Drop multicast:
Toggle to enable or disable.
Enable TX
Beamforming:
Toggle to enable or disable.
Adaptivity mode:
Toggle to enable or disable.
Reduce power on
OFDM:
Toggle to enable or disable.
STBC:
Toggle to enable or disable.
Enable 802.11k:
Choose from Enable or Disable.
Short GI:
Specify the time interval (in milliseconds) between packets sent to
Beacon Period (in
milliseconds): synchronize the wireless network. The default setting is 100ms.
Specify the minimum size (in bites) of a packet for which an RTS frame
RTS threshold (in
bytes): is transmitted. The default size is 2347 bytes and the standard range
is 256-2346 bytes.
Specify in bytes the maximum frame size for a non-fragmented packet.
Frag threshold (in
bytes): The default size is 2346.
D-Link DIR-822 User Manual

Additional 5 GHz

85