D-Link DIR-822 User Manual page 48

Section 4 - Configuration
IPv4
Toggle this switch to enable DNS information to be acquired
Obtain DNS
automatically through DHCP. This setting is enabled by default.
server addresses
automatically:
Specify the primary DNS server IP address assigned by your ISP. This
Primary DNS
address is usually obtained automatically from your ISP.
server:
Specify the secondary DNS server IP address assigned by your ISP. This
Secondary DNS
address is usually obtained automatically from your ISP.
server:
IPv6
Choose Automatically, IPv6 by DHCPv6 or by SLAAC according to
Get IPv6:
the type of IPv6 is used by your ISP. The default setting is Automatically.
Enable prefix delegation. This setting is enabled by default.
Enable prefix
delegation:
Obtain DNS server addresses automatically. This setting is enabled
Obtain DNS
server addresses by default.
automatically:
Specify the primary DNS server IP address assigned by your ISP. This
Primary DNS
server: address is usually obtained automatically from your ISP.
Specify the secondary DNS server IP address assigned by your ISP. This
Secondary DNS
address is usually obtained automatically from your ISP.
server:
Click Apply when you are done.
D-Link DIR-822 User Manual
PPPoE Dual Stack (cont)
44