D-Link DIR-822 User Manual page 57

Section 4 - Configuration
Select Mobile Internet if you are using a mobile connection to connect to the
Internet.
General Settings
Select your connection type.
Connection Type:
Enter name for your connection.
Connection Name:
Toggle this switch to enable the connection. This is enabled by default.
Enable
Disabling this feature may disable your Internet connection.
Connection:
Toggle this switch to enable Network Address Translation (NAT). This
NAT:
setting is enabled by default.
Toggle this switch to enable WAN Ping. This setting is disabled by
Ping:
default.
Modem settings
Choose from AUTO, 3G / 4G, 2G / 3G, 4G, 3G or 2G. AUTO is selected
Mode:
by default.
Enter Access Point Name for your device
APN:
Specify the Dial number provided by your Service Provider.
Dial number:
Enable this setting to connect without a username and password.
Without
This configuration is uncommon and is disabled by default.
authorization:
If Without authorization is disabled, choose from PAP or CHAP.
Authentication
PAP is selected by default.
protocol:
If Without authorization is disabled, specify the PPP username
Username:
provided by your ISP.
D-Link DIR-822 User Manual
Mobile Internet
53