Tr-069 Client - D-Link DSL-G2452GR User Manual

DSL-G2452GR MU-MIMO Wireless Dual Band VDSL2 Router with
ASDL2+/3G/LTE/Gigabit Ethernet WAN Support, 2 FXS Ports and USB Port
User Manual

TR-069 Client

On the Advanced / TR-069 Client page, you can configure the router for communication with a
remote Auto Configuration Server (ACS).
The TR-069 client is used for remote monitoring and management of the device.
You can specify the following parameters:
Parameter
Interface
Enable TR-069 Client
On
Interval
Figure 150. The page for configuring the TR-069 client.
TR-069 Client
The interface which the router uses for communication with the
ACS. Leave the Automatic value to let the device select the
interface basing on the routing table or select another value if
required by your ISP.
Move the switch to the right to enable the TR-069 client.
Inform settings
Move the switch to the right so the router may send reports (data on
the device and network statistics) to the ACS.
Specify the time period (in seconds) between sending reports.
Page 186 of 262
Configuring via Web-based Interface
Description