Network; Ipv4 - D-Link DIR-822 User Manual

Section 4 - Configuration
This section will allow you to change the local network settings of the router and to configure the DHCP settings. In the
Settings menu on the bar on the top of the page, click Network. Click IPv4 and IPv6 to configure their respective settings.
Local IP Address
Specify the IP address of the router. The default IP address is
IP Address:
192.168.0.1.
If you change the IP address, once you click Apply you will need to
enter the new IP address in your browser to access the configuration
utility.
Specify the subnet mask of the router. The default subnet mask is
Mask:
255.255.255.0.
Specify the device domain name and URL to access the management
Hostname:
utility. The default URL is http://dlinkrouter.local/
Gateway IP
For Access Point, Repeater, and Client modes only.
Specify the gateway IP address which is used by the router to connect
Address:
to the internet. (Optional)
D-Link DIR-822 User Manual

Network

IPv4

63