D-Link DIR-822 User Manual
  1. Manuals
  2. Brands
  3. D-Link Manuals
  4. Wireless Router
  5. DIR-822
  6. User manual

D-Link DIR-822 User Manual

Ac1200 wi-fi router
Hide thumbs Also See for DIR-822:
Table of Contents

Advertisement

Quick Links

Version 1.00| 2020/11/02
User Manual
AC1200 Wi-Fi Router
DIR-822

Advertisement

Table of Contents
loading

Related Manuals for D-Link DIR-822

Summary of Contents for D-Link DIR-822

  • Page 1 Version 1.00| 2020/11/02 User Manual AC1200 Wi-Fi Router DIR-822...
  • Page 2 Trademarks D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries. All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies.

  • Page 3: Table Of Contents

    Mobile Internet Mode ..........17 Additional 2.4 GHz ............83 Advanced Settings .............18 Additional 5 GHz ............85 Default Settings ..............18 MAC Filter .................87 Roaming ................89 Configuration ..............19 Advanced ................91 Home ....................20 UPnP IGD ................91 Internet ...................20 Remote Access ..............92 DIR-822 ...................21 D-Link DIR-822 User Manual...
  • Page 4 Network Statistics ............120 Port Statistics ..............121 Routing ................122 DHCP ................123 Multicast Groups ............124 Diagnostics ................ 125 Ping ....................125 Traceroute ..................126 Troubleshooting ............127 Wireless Basics ...............131 What is Wireless? ..............132 D-Link DIR-822 User Manual...

  • Page 5: Product Overview

    If any of the above items are missing or damaged, please contact your local reseller. Note: Using a power supply with a different voltage rating than the one included with the DIR-822 will cause damage and void the warranty for this product.

  • Page 6: System Requirements

    Utility Requirements • Safari 8 or higher • Chrome 48 or higher • Edge 20.10240 or higher Windows Users: Make sure you have the latest version of Java ® installed. Visit www.java.com to download the latest version. D-Link DIR-822 User Manual...

  • Page 7: Introduction

    Introduction The D-Link DIR-822 is a wireless IEEE 802.11ac compliant device that delivers up to 3x faster speeds than 802.11n while staying backward compatible with 802.11n/g/b/a devices. This means you can connect the DIR-822 to a cable or DSL modem and provide high-speed Internet access to multiple computers, game consoles, and media players.

  • Page 8: Features

    802.11n/g/b backward compatibility. • IPv6 Support - The DIR-822 fully supports IPv6 and includes support for a variety of IPv6 connection types including: SLAAC/DHCPv6, Static IPv6, IPv6 PPPoE, IPv6 Dual Stack, and IPv6 LAN.

  • Page 9: Hardware Overview

    A solid light indicates the 2.4 GHz wireless band is enabled. If the light is blinking, data transmission is in 2.4 GHz Wireless LED progress. A solid light indicates the 5 GHz wireless band is enabled. If the light is blinking, data transmission is in 5 GHz Wireless LED progress. D-Link DIR-822 User Manual...

  • Page 10: Back Panel

    LAN Ports (1- 4) Using an Ethernet cable, connect your broadband modem to this port. Internet Port Connector for the supplied power adapter. Power Connector Press the power button to power the device on or off. Power Button D-Link DIR-822 User Manual...

  • Page 11: Installation

    Section 3 - Installation Installation This section will walk you through the installation of the DIR-822. Before you Begin • Placement of the router is very important. Do not place the router in an enclosed area such as a closet, cabinet, attic, or garage.

  • Page 12: Wireless Installation Considerations

    1. Keep the number of walls and ceilings between the D-Link router and other network devices to a minimum - each wall or ceiling can reduce your adapter’s range from 3-90 feet (1-30 meters.) Position your devices so that the number of walls or ceilings is minimized.

  • Page 13: Hardware Setup

    Hardware Setup 1. The DIR-822 is designed to give you the fastest, most stable network connection possible. In order to maximize performance, fully extend the antennas to provide optimal wireless coverage. Keep the router in an open area for better wireless coverage.
  • Page 14 6. Connect the supplied power adapter to the router and a power outlet, press the power button, and wait approximately one minute until the Power LED indicator on the front of the device changes to solid blue. Modem DIR-822 RESET ON / OFF 1.5A LAN4 LAN3 LAN2 LAN1 D-Link DIR-822 User Manual...
  • Page 15 Section 3 - Installation 7. If you are configuring the DIR-822 wirelessly from a PC, connect to a Wi-Fi network printed on the included Wi-Fi Configuration Card. You can also find the Wi-Fi network names and passwords printed on the label attached to the bottom your router.

  • Page 16: Completing Setup

    There are several different ways you can configure your router to connect to the Internet and connect to your clients: • D-Link Setup Wizard - This wizard will launch when you log into the router for the first time. Refer to Setup Wizard on page 13.

  • Page 17: Setup Wizard

    (default: http://192.168.0.1). The wizard is designed to guide you through a step-by-step process to configure your new D-Link router and connect to the Internet. Click Start to continue. To start the full setup wizard, click Continue and see page 14.

  • Page 18: Router Mode

    • Mobile Internet Mode Router Mode In Router Mode, the DIR-822 connects to your cable modem, DSL modem, or other Internet source and shares your Internet connection with your devices both wirelessly and over a wired LAN connection, providing Internet access for an entire home or office.

  • Page 19: Ap Mode

    Follow the on-screen instructions to complete setup. Repeater Mode In Repeater Mode, the DIR-822 extends the range of an existing wireless network. You can use this to extend the coverage of an existing wireless router to provide better signal for parts of your home or office that may have poor reception.

  • Page 20: Client Mode

    This mode is similar to Router mode, but instead of connecting to a cable or DSL modem as your Internet source, the DIR-822 connects to a Wi-Fi hotspot and shares that connection with your devices. You can use this mode to...

  • Page 21: Mobile Internet Mode

    WAN connection, set your own settings for the wireless network in the 2.4 GHz and 5 GHz bands, and set your own password for access to the web-based interface of the device. Follow the on-screen instructions to complete setup. D-Link DIR-822 User Manual...

  • Page 22: Advanced Settings

    Network name 2.4 characters. GHz (SSID): Create a name for your 5 GHz wireless network using up to 32 Network name 5 characters. GHz (SSID): Click Apply to proceed to the router according to Configuration on page 19. D-Link DIR-822 User Manual...

  • Page 23: Configuration

    Management functions. You may quickly jump back to the Home page at any time. Note: The system will automatically log out after a period of inactivity. In order to not be logged out, switch the Stay signed in option in the login screen. D-Link DIR-822 User Manual...

  • Page 24: Home

    To bring up more details about your Internet connection, click on the Internet icon. Click IPv4 or IPv6 to see details of the IPv4 connection and IPv6 connection respectively. To reconfigure the Internet settings, refer to Internet on page 23. D-Link DIR-822 User Manual...
  • Page 25 Section 4 - Configuration DIR-822 Click on the DIR-822 icon to view details about the router and its wireless settings. Here you can see the router’s current Wi-Fi network name and password, as well as the router's MAC address, IPv4 address, and IPv6 address.

  • Page 26: Connected Clients

    Click on the Connected Clients icon to view details about wireless clients connected to the router. On this page you can see all the clients currently connected to the router. Such devices are marked by the colored Wi-Fi logo. D-Link DIR-822 User Manual...

  • Page 27: Settings

    Note that Change Configuration will allow you to change your Configuration: connection type and may disrupt active connections. Click here to see a list of Internet WAN connections and their status. Advanced Mode: You can add, delete or re-initialize a connection. D-Link DIR-822 User Manual...
  • Page 28 For PPTP refer to page 45. For L2TP refer to page 48 . For Mobile Internet refer to page 60. Note: this option can only be edited in the WAN/Adding mode. Click Apply when you are done. D-Link DIR-822 User Manual...
  • Page 29 Toggle this switch to enable WAN Ping. This setting is disabled by Ping: default. Toggle this switch to enable Routing Information Protocol (RIPng). RIPng: This setting is disabled by default. Toggle this switch to enable ARP Proxy. This setting is disabled by ARP Proxy: default. D-Link DIR-822 User Manual...
  • Page 30 ISP. server: Specify a custom vendor ID. (Optional) Vendor ID: Specify a hostname here. This will be the name of your router when Hostname: viewed from networking tools. Click Apply when you are done. D-Link DIR-822 User Manual...
  • Page 31 Toggle this switch to enable WAN Ping. This setting is disabled by Ping: default. Toggle this switch to enable Routing Information Protocol (RIPng). RIPng: This setting is disabled by default. Toggle this switch to enable ARP Proxy. This setting is disabled by ARP Proxy: default. D-Link DIR-822 User Manual...
  • Page 32 Gateway IP address: Specify the primary DNS server IP address assigned by your ISP. Primary DNS server: Specify the secondary DNS server IP address assigned by your ISP. Secondary DNS server: Click Apply when you are done. D-Link DIR-822 User Manual...
  • Page 33 Toggle this switch to enable WAN Ping. This setting is disabled by Ping: default. Toggle this switch to enable Routing Information Protocol (RIP) for RIPng: IPv6. This setting is disabled by default. Toggle this switch to enable ARP Proxy. This setting is disabled by ARP Proxy: default. D-Link DIR-822 User Manual...
  • Page 34 ISP. Specify the secondary DNS server IP address assigned by your ISP. This Secondary DNS address is usually obtained automatically from your ISP. server: Click Apply when you are done. D-Link DIR-822 User Manual...
  • Page 35 Toggle this switch to enable WAN Ping. This setting is disabled by Ping: default. Toggle this switch to enable Routing Information Protocol (RIP) for RIPng: IPv6. This setting is disabled by default. Toggle this switch to enable ARP Proxy. This setting is disabled by ARP Proxy: default. D-Link DIR-822 User Manual...
  • Page 36 Specify the primary DNS server IP address assigned by your ISP. Primary IPv6 DNS server: Specify the secondary DNS server IP address assigned by your ISP. Secondary IPv6 DNS server: Click Apply when you are done. D-Link DIR-822 User Manual...
  • Page 37 Toggle this switch to enable WAN Ping. This setting is disabled by Ping: default. Toggle this switch to enable Routing Information Protocol (RIPng). RIPng: This setting is disabled by default. Toggle this switch to enable ARP Proxy. This setting is disabled by ARP Proxy: default. D-Link DIR-822 User Manual...
  • Page 38 If Without authorization is disabled, specify the PPP username Username: provided by your ISP. If Without authorization is disabled, specify the PPP password Password: provided by your ISP. Specify the ISP service name (optional). Service name: D-Link DIR-822 User Manual...
  • Page 39 Specify extra options if required by your ISP. Extra options: Specify the IP address provided by your ISP. Static IP address: Toggle this switch to enable PPP debug, this setting is disabled by PPP debug: default. D-Link DIR-822 User Manual...
  • Page 40 Specify the primary DNS server IP address assigned by your ISP. This Primary DNS address is usually obtained automatically from your ISP. server: Specify the secondary DNS server IP address assigned by your ISP. This Secondary DNS address is usually obtained automatically from your ISP. server: D-Link DIR-822 User Manual...
  • Page 41 Toggle this switch to enable WAN Ping. This setting is disabled by Ping: default. Toggle this switch to enable Routing Information Protocol (RIP) for RIPng: IPv6. This setting is disabled by default. Toggle this switch to enable ARP Proxy. This setting is disabled by ARP Proxy: default. D-Link DIR-822 User Manual...
  • Page 42 If Without authorization is disabled, specify the PPP username Username: provided by your ISP. If Without authorization is disabled, specify the PPP password Password: provided by your ISP. Specify the ISP service name (optional). Service name: D-Link DIR-822 User Manual...
  • Page 43 Specify extra options if required by your ISP. Extra options: Specify the IP address provided by your ISP. Static IP address: Toggle this switch to enable PPP debug, this setting is disabled by PPP debug: default. D-Link DIR-822 User Manual...
  • Page 44 ISP. Specify the secondary DNS server IP address assigned by your ISP. This Secondary DNS address is usually obtained automatically from your ISP. server: Click Apply when you are done. D-Link DIR-822 User Manual...
  • Page 45 This setting is disabled by default. Toggle this switch to enable Routing Information Protocol (RIPng) for RIPngng: IPv6. This setting is disabled by default. Toggle this switch to enable ARP Proxy. This setting is disabled by ARP Proxy: default. D-Link DIR-822 User Manual...
  • Page 46 If Without authorization is disabled, specify the PPP username Username: provided by your ISP. If Without authorization is disabled, specify the PPP password Password: provided by your ISP. Specify the ISP service name (optional). Service name: D-Link DIR-822 User Manual...
  • Page 47 Specify extra options if required by your ISP. Extra options: Specify the IP address provided by your ISP. Static IP address: Toggle this switch to enable PPP debug, this setting is disabled by PPP debug: default. D-Link DIR-822 User Manual...
  • Page 48 ISP. Specify the secondary DNS server IP address assigned by your ISP. This Secondary DNS address is usually obtained automatically from your ISP. server: Click Apply when you are done. D-Link DIR-822 User Manual...
  • Page 49 Disabling this feature may disable your Internet connection. Connection: Toggle this switch to enable Network Address Translation (NAT). This NAT: setting is enabled by default. Toggle this switch to enable WAN Ping. This setting is disabled by Ping: default. D-Link DIR-822 User Manual...
  • Page 50 If you have enabled Keep alive, specify the maximum number of LCP LCP fails: fails before the connection is dropped. Enable this option to automatically dial a PPPoE connection when Dial on demand: data flow is detected. D-Link DIR-822 User Manual...
  • Page 51 ISP. Specify the secondary DNS server IP address assigned by your ISP. This Secondary DNS address is usually obtained automatically from your ISP. server: Click Apply when you are done. D-Link DIR-822 User Manual...
  • Page 52 If Without authorization is disabled, specify the PPP username Username: provided by your ISP. If Without authorization is disabled, specify the PPP password Password: provided by your ISP. Specify the VPN server address provided by your ISP. VPN Server address: D-Link DIR-822 User Manual...
  • Page 53 Specify extra options if required by your ISP. Extra options: Specify the IP address provided by your ISP. Static IP address: Toggle this switch to enable PPP debug. This feature is disabled by PPP debug: default. D-Link DIR-822 User Manual...
  • Page 54 ISP. server: Specify the secondary DNS server IP address assigned by your ISP. This Secondary DNS address is usually obtained automatically from your ISP. server: Click Apply when you are done. D-Link DIR-822 User Manual...
  • Page 55 Toggle this switch to enable Network Address Translation (NAT). This NAT: setting is enabled by default. IPsec Enter your pre-shared key for your connection. Pre-shared key: Enable PFS for your connection. Enable PFS: Enter the connection port for your connection. Specify connection port: D-Link DIR-822 User Manual...
  • Page 56 If Without authorization is disabled, specify the PPP username Username: provided by your ISP. If Without authorization is disabled, specify the PPP password Password: provided by your ISP. Specify the VPN server address provided by your ISP. VPN Server address: D-Link DIR-822 User Manual...
  • Page 57 This configuration is uncommon and is disabled by default. authorization: If Without authorization is disabled, choose from PAP or CHAP. Authentication PAP is selected by default. protocol: If Without authorization is disabled, specify the PPP username Username: provided by your ISP. D-Link DIR-822 User Manual...
  • Page 58 If you have enabled Dial on demand, specify a maximum idle time Maximum idle in seconds before the connection will be dropped. time: Toggle this switch to enable PPP debug. This feature is disabled by PPP debug: default. D-Link DIR-822 User Manual...
  • Page 59 The maximum number of attempts the ping command will execute The maximum number of before stopping. attempts: The maximum response time for one attempt Timeout (in seconds): Click ADD to add addresses to ping. Addresses: Click Apply when you are done. D-Link DIR-822 User Manual...

  • Page 60: Vlan

    Indicates the VLAN ID to which the tagged ports belong. VLAN ID: This column indicates the name of the VLAN. Name: This column indicates the tagged ports belonging to the VLAN. Tagged port: This column indicates the untagged ports belonging to the VLAN. Untagged Ports: D-Link DIR-822 User Manual...
  • Page 61 If you have chosen to edit an existing tagged connection, or if you VLAN ID: have chosen to add a bridge connection, select the tagged ports to be included in the VLAN. Click Apply when you are done. D-Link DIR-822 User Manual...

  • Page 62: Dns

    If Manual is set as enabled, specify one or more IP addresses for DNS IP address: name servers. Click here to add an additional server. Add Server: Reserve servers IPv4/IPv6 Click here to add Reserve servers. Add Server: Click Apply when you are done. D-Link DIR-822 User Manual...

  • Page 63: Wan Failover

    Click here to add additional test host IPs. Specify a test host IP address ADD HOST: the router will use to determine the status of the connection. The default setting is 8.8.8.8, which is the public Google DNS. Click Apply when you are done. D-Link DIR-822 User Manual...

  • Page 64: Wireless Network

    Toggle this switch to enable higher channels. Enable additional channels: If Select channel automatically is disabled, select the channel your Channel: router will use. Toggle this switch to periodically scan for an optimal channel. Enable periodic scanning: D-Link DIR-822 User Manual...
  • Page 65 Toggle this switch to prevent Wi-Fi clients from interacting with each Clients isolation: other. Security Settings Select Open,WPA, WPA-PSK,WPA2, WPA2-PSK, WPA/WPA2 mixed, Network WPA-PSK/WPA2-PSK mixed, WPA3-SAE, or WPA2-PSK/WPA3-SAE authentication: mixed. The default and recommended setting is WPA2-PSK. D-Link DIR-822 User Manual...
  • Page 66 Click ADD WI-FI NETWORK to create an additional wireless network. If you want the devices connected to the additional network to be isolated from the devices and resources of the router's LAN, enable guest network in its settings. D-Link DIR-822 User Manual...

  • Page 67: Network

    Specify the device domain name and URL to access the management Hostname: utility. The default URL is http://dlinkrouter.local/ Gateway IP For Access Point, Repeater, and Client modes only. Specify the gateway IP address which is used by the router to connect Address: to the internet. (Optional) D-Link DIR-822 User Manual...
  • Page 68 Enable for the router to use its MAC address to respond to ARP ARP Proxy: requests sent to devices in its LAN. Disable for the router to use its MAC addresses of devices in its LAN to respond to ARP requests sent to these devices. D-Link DIR-822 User Manual...
  • Page 69 Clients list: information to the Static IP Addresses list. Click here to refresh the connected clients list. Refresh: Click OK to save changes or click the X in the upper right hand corner to cancel changes. D-Link DIR-822 User Manual...
  • Page 70 Hostname: Specify the lease time of the client for which the IP is reserved. Lease time (in minutes): Click Apply to save changes or click the X in the upper right hand corner to cancel changes. D-Link DIR-822 User Manual...

  • Page 71: Ipv6

    If Stateful or Stateless has been selected, specify the lease time in Lease Time: minutes for dynamic IPv6 addresses. Click Apply when you are done. If Stateful is selected then the following options will be available. D-Link DIR-822 User Manual...
  • Page 72 Hostname: Specify the lease time of the client for which the IP is reserved. Lease time (in minutes): Click Apply to save changes or click the X in the upper right hand corner to cancel changes. D-Link DIR-822 User Manual...

  • Page 73: Functions

    Indicates the number of the filter. Indicates the name of the filter. Name: Indicates whether the is enabled or disabled. State: Indicates the action taken when the filter is triggered. Action: Indicate to which IP version the filter applies. IP version: D-Link DIR-822 User Manual...
  • Page 74 LAN to WAN, WAN to LAN or LAN to Router. Destination IP Address Choose Range or single IP address to enter a specific IP address or Set as: ranges for the destination filter. Choose Subnet to specify a subnet only. D-Link DIR-822 User Manual...
  • Page 75 Specify multiple ports by separating them with commas. Specify port ranges by separating the beginning and end of the range with a colon. Click Apply when you are done. D-Link DIR-822 User Manual...
  • Page 76 LAN devices to connect directly to the DMZ host by using the WAN Loopback: IP address. If DMZ is enabled, specify the IP address of the DMZ host. IP Address: Click Apply when you are done. D-Link DIR-822 User Manual...
  • Page 77 Indicates the number of the filter. State: Indicates the action taken when the filter is triggered. Action: Indicates the MAC address to which the filter applies. MAC address: Indicates the hostname of the device to which the filter applies. Name: D-Link DIR-822 User Manual...
  • Page 78 Specify the MAC address of the host to which the filter will apply. This MAC address: field is mandatory. Specify the hostname of the host to which the filter will apply. This Name: field is optional. Click Save when you are done, or click the X to cancel. D-Link DIR-822 User Manual...

  • Page 79: Wi-Fi

    (SSID): Indicates signal strength as a percentage. Signal Level: Indicates the time online in minutes. Online: Indicates the last recorded transmission rate in Mbps. Last RX rate: Indicates total bytes received or transmitted this session. Rx/Tx: D-Link DIR-822 User Manual...

  • Page 80: Wps

    Choose PBC (Push Button Connection). WPS Method Click here to initiate the pairing process. Connect: Information Shows whether it is configured or not. WPS state: Indicates the SSID to which the client is connected. Network name (SSID): D-Link DIR-822 User Manual...
  • Page 81 Indicates the type of authentication used on the network. Network authentication: Indicates the encryption used by the authentication method. Encryption: Indicates the password of the network. Password PSK: Click this button to refresh the page. Update: D-Link DIR-822 User Manual...

  • Page 82: Wmm

    This setting is intended for advanced users only and is not recommended for most users. Access Point/Station If Work mode has been set to Manual, you can click on each row to configure advanced QoS settings for that connection type. D-Link DIR-822 User Manual...

  • Page 83: Client

    If you choose Select network from list, select the network you network: wish to connect to and enter any necessary security information as prompted. If you choose Connect to hidden network, enter the Wi-Fi information below. D-Link DIR-822 User Manual...
  • Page 84 Specify the password or PSK used by the hidden network. This must Password PSK: be specified correctly to connect. Specify the encyption type used by the hidden network. This must Encryption type: be specified correctly to connect. Click Apply when you are done. D-Link DIR-822 User Manual...

  • Page 85: Client Shaping

    Select the frequency band for this rule. Frequency band: Select the SSID for this rule. SSID: Toggle this switch to enable the rule. Enabled: Specify the MAC address of the Wi-Fi client to which the rule will apply. MAC address: D-Link DIR-822 User Manual...
  • Page 86 Toggle this switch to disable the limit for the corresponding transfer Not limited: type. If Not limited is disabled, specify a maximum transfer rate in megabits Maximum rate: per second. Click Save when you are done. D-Link DIR-822 User Manual...

  • Page 87: Additional 2.4 Ghz

    If 5 GHz is selected. Toggle to enable or disable. Reduce power on OFDM: Toggle to enable or disable. STBC: Toggle to enable or disable. Enable 802.11k: Choose from Auto, Always On or Always Off. B/G protection: Choose from Enable or Disable. Short GI: D-Link DIR-822 User Manual...
  • Page 88 Specify how often (by the number of beacon frames) that DTIM is DTIM period (in transmitted. By default this is set to 1. beacon frames): Specify the time interval (in seconds) between keep alive checks of Station Keep Alive (in seconds): wireless devices from your WLAN. D-Link DIR-822 User Manual...

  • Page 89: Additional 5 Ghz

    The default size is 2347 bytes and the standard range is 256-2346 bytes. Specify in bytes the maximum frame size for a non-fragmented packet. Frag threshold (in bytes): The default size is 2346. D-Link DIR-822 User Manual...
  • Page 90 Specify how often (by the number of beacon frames) that DTIM is DTIM period (in transmitted. By default this is set to 1. beacon frames): Specify the time interval (in seconds) between keep alive checks of Station Keep Alive wireless devices from your WLAN. (in seconds): D-Link DIR-822 User Manual...

  • Page 91: Mac Filter

    Choose which SSID you want the rule to apply to. SSID: Specify the MAC address of the device. MAC Address: Specify hostname of the device (optional). Hostname: Toggle this switch to enable or disable the rule. Enable Rule: D-Link DIR-822 User Manual...
  • Page 92 To delete a filter, select the corresponding check box then click on the delete symbol. To enable MAC Filter on a schedule, click the Set schedule button ( ). In the opened window, you can create a new schedule (see the Schedule section Simplified mode on page 119page 118). D-Link DIR-822 User Manual...

  • Page 93: Roaming

    Toggle this switch to enable threshold value of connection quality. Threshold value of connection quality: Specify the TTL (Time to live) parameter value. The recommended Multicast TTL: value is 4. Specify the address of the multicast group (from the subnet Multicast group 239.255.0.0/16). address: D-Link DIR-822 User Manual...
  • Page 94 Minimum level of connection quality: Specify in percentage the dead zone (from -50% to 50%). Dead zone: Specify in percentage of threshhold value of connection quality. Threshhold value of connection quality (in percent): Click Apply when finished. D-Link DIR-822 User Manual...

  • Page 95: Advanced

    Private Port: Indicates the port exposed to the internet used by the UPnP Public port: connection. Indicates the description of the protocol used by the UPnP connection. Description: Indicates the duration of the UPnP connection. Duration: D-Link DIR-822 User Manual...

  • Page 96: Remote Access

    Select IPv4 or IPv6. IP Version: Toggle this switch to enable any remote host to access the GUI. This Open access: is not recommended. Specify the IP address of the remote host allowed to access the GUI. IP address: D-Link DIR-822 User Manual...
  • Page 97 Mask: Specify the port over which the remote host will access the GUI. Public Port: Choose HTTP, HTTPS, FTP, TELNET, SMB or SSH as the protocol for Protocol: remote access. Click Save when you are done. D-Link DIR-822 User Manual...
  • Page 98 Specify the remote IP to which the rule will apply. Remote IP: Click this button to add additional remote IP fields. Add Remote IP: Specify the remote IP to which the rule will apply. Public port: D-Link DIR-822 User Manual...
  • Page 99 Specify a start and an end port to which the rule will apply. If you wish Private Port (start/ to specify a single port, specify a start port only. end): Click Apply when you are done. D-Link DIR-822 User Manual...

  • Page 100: Tr-069 Client

    Specify the username for your ISP's ACS. Username: Specify the password for your ISP's ACS. Password: Inform Settings Toggle this switch to enable active contact with your ISP's ACS. Enable: Specify the interval in seconds for each inform packet. Interval: D-Link DIR-822 User Manual...
  • Page 101 TR-069 Client (cont) Connection Request Settings Specify the username here. Username: Specify the password here. Password: Specify the request port here. Request Port: Specify the request path here. Request Path: Click Apply when you are done. D-Link DIR-822 User Manual...

  • Page 102: Static Route

    Choose the protocol used by the static route. Protocol: Choose the interface used by the static route. Interface: Specify the IP address of the destination. Destination network: Specify the netmask used by the destination IP. Destination netmask: D-Link DIR-822 User Manual...
  • Page 103 Section 4 - Configuration Static Route (cont) Specify the gateway used by the static route. Gateway: Specify a metric between 1 and 255. Metric: Select a route table for the static route. Table: Click Save when you are done. D-Link DIR-822 User Manual...

  • Page 104: Dynamic Dns

    Indicates the hostname of the DDNS service. Hostname: Indicates the name of the DDNS service. DDNS service: Indicates the username used with the DDNS service. Username: Indicates the update period in minutes of the DDNS service. Update period: D-Link DIR-822 User Manual...
  • Page 105 Path field. Specify the username for your DDNS service. Username: Specify the password for your DDNS service. Password: Specify the update period in minutes. Update period: Click Save when you are done. D-Link DIR-822 User Manual...

  • Page 106: Ipsec

    Click here to add a new IPsec client, described in IPsec/Adding on Add: page 104. Click this button to delete the selected tunnel(s). Delete: Indicates the remote host of the tunnel. Remote host: Indicates the encryption algorithm used by the tunnel. Encryption algorithm: D-Link DIR-822 User Manual...
  • Page 107 Indicates the interface over which the tunnel operates. Interface: Status Indicates the status of the remote host of the tunnel. Remote host: Indicates Internet Key Exchange. IKE: Indicates any security association negotiated via IKE SA. CHILD: Indicates tunnel status. State: D-Link DIR-822 User Manual...
  • Page 108 Toggle this switch to enable/disable Dead Peer Detection. Enable DPD: Specify in seconds DPD delay. DPD delay: Specify maximum seconds of DPD timeouts. DPD time out, sec: Specify from drop down list either Manual or Path MTU Discovery. TCP MSS: D-Link DIR-822 User Manual...
  • Page 109 Specify from drop down list the encryption algorithm for Second Encryption Algorithm: Phase. Specify from drop down list the authentication algorithm for First Second phase encryption Phase. algorithm: Choose the hashing mode for First Phase from drop down list. Hashing mode: D-Link DIR-822 User Manual...
  • Page 110 Click to add rule to apply to IPsec tunnel. Add: Click to delete rule. Delete: Specify/shows the local subnet of IPsec tunnel. Local Network: Specify/shows the remote subnet of IPsec tunnel. Remote Subnet: Click Apply when finished. D-Link DIR-822 User Manual...

  • Page 111: Ports Settings

    To configure a port, click on the corresponding port you wish to configure. Specify from drop down list port speed. Speed: Toggle this switch to enable/disable autonegotiation modes. Autonegotiation Modes: Toggle this switch to enable/disable symmetric flow control. Flow Control: D-Link DIR-822 User Manual...

  • Page 112: Redirect

    Connection Error: Toggle this switch to enable notification if connection failure to due No Connection: no connection detected. Toggle this switch to enable notification if connection failure due to The Device is not device not configured. Configured: D-Link DIR-822 User Manual...

  • Page 113: Igmp/Mld

    Click APPLY when finished. Toggle this switch to enable/disable MLD. Enable/Disable: Choose from drop down list which MLD version to use. MLD version: Choose from drop down list which interface to apply to. Interface: Click APPLY when finished. D-Link DIR-822 User Manual...

  • Page 114: Alg/Passthrough

    The ALG/Passthrough page allows you to configure the router to use RTSP, enable the SIP ALG and PPPoE/PPTP/L2TP/IPsec passthrough functions. Toggle this switch to enable/disable the following: PPPoE passthrough RTSP IPsec passthrough L2TP passthrough PPTP passthrough Click APPLY when finished. D-Link DIR-822 User Manual...

  • Page 115: Management

    To set the time zone in accordance with the settings of your operating system or portable device, click DETERMINE TIMEZONE. NTP Servers Displays default public time server. Click on 'x' to delete. Click ADD SERVER to add a new public time server. D-Link DIR-822 User Manual...

  • Page 116: System Log

    Export: Settings Toggle this switch to enable/disable logging function. Enable/Disable: Choose from drop down list type of diagnostics to log. Type: Choose from drop down list level of diagnostics to log. Level: Click APPLY when finished. D-Link DIR-822 User Manual...

  • Page 117: Administration

    Click to load previously saved configuration file to the device. Restore: Click to save current settings. Save: Click to reboot device. Reboot: Specify a period of inactivity (in minutes) after which the device will Idle Time: log you out. D-Link DIR-822 User Manual...

  • Page 118: Telnet/Ssh

    TELNET from your LAN. Toggle this switch to enable Telnet. Enable/Disable Telnet: Specify port number for Telnet access. Port: Toggle this switch to enable SSH. Enable/Disable SSH: Specify port number for SSH access. Port: Click APPLY when finished. D-Link DIR-822 User Manual...

  • Page 119: Yandex.dns

    For the devices in child mode, it will block websites containing adult Child: media. It is recommended to enable this mode for devices used by children. Click APPLY when finished. The selected filtering mode will be applied to all devices connected to the router's network. D-Link DIR-822 User Manual...
  • Page 120 Indicates the Yandex rule applied to the client. Rule: Create Rule Specify the MAC address of the device. MAC address: Specify the name of the device. Name: Specify the rule to apply. Rule: Click Save when you are done. Click APPLY when finished. D-Link DIR-822 User Manual...

  • Page 121: Firmware Update

    Toggle this switch to check for updates automatically. Enable/Disable: Specify the interval to check for firmware updates. Interval (in seconds): Click on CHECK FOR UPDATES to check for the latest firmware available from the remote server. Click on APPLY SETTINGS when finished. D-Link DIR-822 User Manual...

  • Page 122: Schedule

    Shows the schedule. Schedule: Shows the duration of the schedule. Duration: Shows if tasks will be performed as part of the schedule. Tasks: Click ( ) when to add a schedule or ( ) to delete selected schedule. D-Link DIR-822 User Manual...
  • Page 123 Specify the time to the month (1-12). Month: Specify the time to the day of the week (0-6). Days of week: Displays the schedule. Schedule: Specify the duration of this schedule. Duration: Click on SAVE when finished. D-Link DIR-822 User Manual...

  • Page 124: Statistics

    Name of connection. Name: IP Address and Gateway IP - Gateway: Receive and Transmit volume Rx/Tx: Number of Rx/Tx errors. Rx/Tx Errors Duration of connection. Duration Click on the connection to view further details of the connection. D-Link DIR-822 User Manual...

  • Page 125: Port Statistics

    Current status of the port. Status: Amount of traffic sent in Mbyte. Traffic sent Amount of traffic received in Mbyte. Traffic received Click on the port to view the full list of counters for the port. D-Link DIR-822 User Manual...

  • Page 126: Routing

    Hexadecimal FWmark and FWmark mask for Linux Advanced Routing FWmark (HEX): and Traffic Control. Tables ID of the table. Name of the table. Name: Descriptions of the routing table. Description: Click on the routing table to view detailed data for the routing table. D-Link DIR-822 User Manual...

  • Page 127: Dhcp

    The DHCP page displays information on computers that have received IP addresses from the DHCP of the router. DHCP Hostname of connected device. Hostname: IP address from connected device. IP Address: MAC address of connected device. MAC: IP address expiration date (lease time). Expires: D-Link DIR-822 User Manual...

  • Page 128: Multicast Groups

    IPv4 IP address of active IPv4 multicast group. IP Address: Interface of active IPv4 mutlicast group. Interface: IPv6 IP address of active IPv6 multicast group. IP Address: Interface of active IPv6 mutlicast group. Interface: D-Link DIR-822 User Manual...

  • Page 129: Diagnostics

    Packet Size: Time to wait for a response in seconds. Wait Time: Click OK to save or DEFAULT SETTINGS to reset back to default configuration. Click START to begin Ping Test or CLEAR to clear the results. D-Link DIR-822 User Manual...

  • Page 130: Traceroute

    Number of probe packets to a hop. Number of probes: Hop response time in seconds. Wait Time: Click OK to save or DEFAULT SETTINGS to reset back to default configuration. Click START to begin Traceroute or CLEAR to clear the results. D-Link DIR-822 User Manual...

  • Page 131: Troubleshooting

    1. Why can’t I access the web-based configuration utility? When entering the IP address of the D-Link router (192.168.0.1 for example), you are not connecting to a website, nor do you have to be connected to the Internet. The device has the utility built-in to a ROM chip in the device itself. Your computer must be on the same IP subnet to connect to the web-based utility.
  • Page 132 • Close your web browser (if open) and open it. • Access the web management. Open your web browser and enter the IP address of your D-Link router in the address bar. This should open the login page for your web management.
  • Page 133 • Windows® 95, 98, and Me users type in command (Windows® NT, 2000, XP, Vista®, and 7 users type in cmd) and press Enter (or click OK). • Once the window opens, you’ll need to do a special ping. Use the following syntax: ping [url] [-f] [-l] [MTU value] Example: ping yahoo.com -f -l 1472 D-Link DIR-822 User Manual...
  • Page 134 • To change the MTU, enter the number in the MTU field and click Apply to save your settings. • Test your email. If changing the MTU does not resolve the problem, continue changing the MTU in increments of ten. D-Link DIR-822 User Manual...

  • Page 135: Wireless Basics

    D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business, or public access wireless networks. Strictly adhering to the IEEE standard, the D-Link wireless family of products will allow you to securely access the data you want, when, and where you want it. You will be able to enjoy the freedom that wireless networking delivers.

  • Page 136: What Is Wireless

    Why D-Link Wireless? D-Link is the worldwide leader and award winning designer, developer, and manufacturer of networking products. D-Link delivers the performance you need at a price you can afford. D-Link has all the products you need to build your network.
  • Page 137 Who uses wireless? Wireless technology as become so popular in recent years that almost everyone is using it, whether it’s for home, office, business, D-Link has a wireless solution for it. Home Uses/Benefits • Gives everyone at home broadband access •...

  • Page 138: Tips

    The wireless connection in public places is usually called “hotspots”. Using a D-Link USB adapter with your laptop, you can access the hotspot to connect to the Internet from remote locations like: airports, hotels, coffee shops, libraries, restaurants, and convention centers.

  • Page 139: Wireless Modes

    • Ad-hoc – Directly connecting to another computer for peer-to-peer communication using wireless network adapters on each computer, such as two or more DIR-822 wireless network USB adapters. An Infrastructure network contains an access point or wireless router. All the wireless devices, or clients, will connect to the wireless router or access point.

  • Page 140: Networking Basics

    Check your IP address After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below.

  • Page 141: Statically Assign An Ip Address

    Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The Secondary DNS is not needed or you may enter a DNS server from your ISP. Step 5 Click OK twice to save your settings. D-Link DIR-822 User Manual...

  • Page 142: Technical Specifications

    Environmental factors will adversely affect wireless signal range. 2 Frequency Range varies depending on country’s regulation. 3 The DIR-822 does not include 5.25-5.35 GHz & 5.47-5.725 GHz in some regions. D-Link DIR-822 User Manual...

  • Page 143: Regulatory Statements

    Note The country code selection is for non-USA models only and is not available to all USA models. Per FCC regulations, all WiFi product marketed in the USA must be fixed to USA operational channels only. D-Link DIR-822 User Manual...
  • Page 144 Cet équipement est conforme aux limites d'exposition aux rayonnements ISED établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. D-Link DIR-822 User Manual...
  • Page 145 Potencia máxima de Salida Frequenza/e Potenza max. Output Frequentie(s) Max. Output Power 5.15 – 5.25 GHz 200 mW 5.25 – 5.35 GHz 200 mW 5.47 – 5.725 GHz 2.4 G 2.4 – 2.4835 GHz 100 mW D-Link DIR-822 User Manual...
  • Page 146 υλικολογισμικό του προϊόντος είναι διαθέσιμα για λήψη από τη σελίδα του προϊόντος στην τοποθεσία www.dlink. com. Par les présentes, D-Link Corporation déclare que ce produit, ces accessoires et ce logiciel sont conformes aux Français [French] directives 2014/53/UE.Le texte complet de la déclaration de conformité de l'UE et le icroprogramme du produit sont disponibles au téléchargement sur la page des produits à...
  • Page 147 2014/53/EU. Pełen tekst deklaracji zgodności UE oraz oprogramowanie sprzętowe do produktu można pobrać na stronie produktu w witrynie www.dlink.com. Desta forma, a D-Link Corporation declara que este produto, os acessórios e o software estão em conformidade Português [Portuguese] com a diretiva 2014/53/UE. O texto completo da declaração de conformidade da UE e do firmware...
  • Page 148 2014/53/EU. Hela texten med EU-försäkran om överensstämmelse och produkt-firmware kan hämtas från produktsidan på www.dlink.com. Hér með lýsir D-Link Corporation því yfir að þessi vara, fylgihlutir og hugbúnaður eru í samræmi við tilskipun Íslenska [Icelandic] 2014/53/EB. Sækja má ESB-samræmisyfirlýsinguna í heild sinni og fastbúnað vörunnar af vefsíðu vörunnar á www.
  • Page 149 Access Points unterstützen die Funktionen DFS (Dynamic Frequency Selection) und TPC (Transmit Power Control) wie erforderlich bei Betrieb auf 5 GHz innerhalb der EU. • Bitte schlagen Sie im Handbuch oder Datenblatt nach nach, ob Ihr Gerät eine 2,4 GHz und / oder 5 GHz Verbindung nutzt. D-Link DIR-822 User Manual...
  • Page 150 5 GHz dentro de la UE. • Por favor compruebe el manual o la ficha de producto para comprobar si el producto utiliza las bandas inalámbricas de 2.4 GHz y/o la de 5 GHz. D-Link DIR-822 User Manual...
  • Page 151 Toegangspunten ondersteunen DFS (Dynamic Frequency Selection) en TPC (Transmit Power Control) functionaliteit zoals vereist bij gebruik in 5 GHz binnen de EU. • Raadpleeg de handleiding of de datasheet om te controleren of uw product gebruik maakt van 2.4 GHz en/of 5 GHz. D-Link DIR-822 User Manual...
  • Page 152 • Halten Sie das Produkt von Heizkörpern und anderen Quellen fern, die Wärme erzeugen. • Trennen Sie das Produkt immer von der Stromzufuhr, bevor Sie es reinigen und verwenden Sie dazu ausschließlich ein trockenes fusselfreies Tuch. D-Link DIR-822 User Manual...
  • Page 153 • Mantenga el producto alejado de los radiadores y de otras fuentes de calor. • Desenchufe siempre el producto de la alimentación de red antes de limpiarlo y utilice solo un paño seco sin pelusa. D-Link DIR-822 User Manual...
  • Page 154 • Houd het product uit de buurt van radiators en andere warmtebronnen. • U dient het product steeds los te koppelen van de stroom voordat u het reinigt en gebruik uitsluitend een droge pluisvrije doek. D-Link DIR-822 User Manual...
  • Page 155 D-Link designs and builds its products to be as environmentally friendly as possible, by using recyclable, low toxic materials in both products and packaging. D-Link recommends that you always switch off or unplug your D-Link products when they are not in use. By doing so you will help to save energy and reduce CO2 emissions.
  • Page 156 D-Link et l’environnement Chez D-Link, nous sommes conscients de l'impact de nos opérations et produits sur l'environnement et nous engageons à le réduire. Pour limiter cet impact, D-Link conçoit et fabrique ses produits de manière aussi écologique que possible, en utilisant des matériaux recyclables et faiblement toxiques, tant dans ses produits que ses emballages.
  • Page 157 D-Link zijn producten zo milieuvriendelijk mogelijk, door het gebruik van recycleerbare producten met lage toxiciteit in product en verpakking. D-Link raadt aan om steeds uw D-Link producten uit te schakelen of uit de stekker te halen wanneer u ze niet gebruikt. Door dit te doen bespaart u energie en beperkt u de CO2-emissies.
  • Page 158 D-Link a životní prostředí Ve společnosti D-Link jsme si vědomi vlivu našich provozů a výrobků na životní prostředí a snažíme se o minimalizaci těchto vlivů. Proto své výrobky navrhujeme a vyrábíme tak, aby byly co nejekologičtější, a ve výrobcích i obalech používáme recyklovatelné a nízkotoxické materiály.
  • Page 159 D-Link produkter som er så miljøvennlig som mulig, ved å bruke resirkulerbare, lav-toksiske materialer både i produktene og forpakningen. D-Link anbefaler at du alltid slår av eller frakobler D-Link-produkter når de ikke er i bruk. Ved å gjøre dette hjelper du å spare energi og å redusere CO2-utslipp.
  • Page 160 D-Link sine produkter, så de er så miljøvenlige som muligt, ved at bruge genanvendelige materialer med lavt giftighedsniveau i både produkter og emballage. D-Link anbefaler, at du altid slukker eller frakobler dine D-Link-produkter, når de ikke er i brug. Ved at gøre det bidrager du til at spare energi og reducere CO2-udledningerne.
  • Page 161 D-Link och miljön På D-Link förstår vi och är fast beslutna att minska den påverkan våra verksamheter och produkter kan ha på miljön. För att minska denna påverkan utformar och bygger D-Link sina produkter för att de ska vara så miljövänliga som möjligt, genom att använda återvinningsbara material med låg gifthalt i både produkter och förpackningar.

Table of Contents