Main Module And Encoder Umbilical Cable; Figure 1-5 The Buckle Assembly Parts; Figure 1-6 The Encoder Umbilical Cable - Olympus ChainSCANNER User Manual

pipe outside diameters (OD), the catch link can be removed and the buckle arm
hooked directly onto the rear attachment of the main module (see Figure 3-1 on
page 50).
Catch link
1.5

Main Module and Encoder Umbilical Cable

The main module of the ChainSCANNER offers an ergonomic grip to manipulate
the scanner (see Figure 1-7 on page 18). The main module also holds an internal
x-axis encoder and its connector. The umbilical encoder cable connects to the
x-axis connector and provides the y-axis encoder connector (see Figure 1-6 on
page 17).
X-axis encoder
Buckle arm
Buckle latch

Figure 1-5 The buckle assembly parts

connector

Figure 1-6 The encoder umbilical cable

DMTA069-01EN, Rev. D, March 2017
Tension adjustment
screw
Link knob
Cable management
tabs
Y-axis connector
Overview 17