Xerox VersaLink C71 Series User Documentation page 211

Probable Causes
Something is wrong with the outlet connected to the
printer.
The printer is connected to an outlet with a voltage
or frequency that does not match the printer
specifications.
Plug the three-wire cord with grounding prong directly into a grounded AC outlet.
Caution:
P P r r i i n n t t e e r r R R e e s s e e t t s s o o r r P P o o w w e e r r s s O O f f f f F F r r e e q q u u e e n n t t l l y y
Probable Causes
The power cord is not plugged into the outlet
correctly.
A system error occurred.
The printer is connected to an uninterruptible power
supply.
The printer is connected to a power strip shared with
other high-power devices.
The Auto Power Off feature is enabled to save
power.
P P r r i i n n t t e e r r D D o o e e s s N N o o t t P P r r i i n n t t
Probable Causes
The printer is in Power Saver mode.
The printer has an error.
Solutions
Plug another electrical appliance into the outlet and
check if it operates properly.
Try a different outlet.
Use a power source with the specifications listed in
the Electrical Specifications.
Solutions
Power off the printer, confirm that the power cord is
plugged in correctly to the printer and the outlet,
then power on the printer.
Power off the printer, then power on again. For more
information, refer to Printing the Error History
If the error persists, contact your Xerox
representative.
Power off the printer, then connect the power cord to
a suitable outlet.
Plug the printer directly into the outlet or into a
power strip that is not shared with other devices.
Increase the Auto Power Off timer setting or disable
the Auto Power Off feature. For more information,
refer to the System Administrator Guide at
xerox.com/office/VLC71XXdocs.
Solutions
On the control panel, press the Power/Wake button.
If the Status LED is blinking amber, follow the
instructions on the control panel to clear the error. If
the error persists, contact your Xerox representative.
Report.
www.
211