Technical Data - Delta DE212 GLOBAL Operation And Installation Manual

T D
ECHNICAL ATA
This equipment complies with the following standards:
Europe/EU: ERC 70-03 EN 300-400. USA: FCC 15.249. Japan: STD-T66.
It is in accordance to EU's demands in order to label the equipment with CE.
Transmitters are ATEX/IECEx approved, according to: EN 50 014:1997+A1+A2. EN 50 020:2013 and
For the EU : II 2 G Ex ib IIC T4, EN 60079-0:2012 + A11:2013 and EN 60079-11:2012
IECEx: IEC 60079-0 Ed.6 and IEC 60079-11 :2011
ATEX certification number: ZELM 03 ATEX 0139x
IECEs certification: IECEx ZLM 13.005X
General Specification
•
Frequency:
•
Modulation:
•
Coding:
•
Functions:
•
Temperature Range:
Operation:
o
Storage:
o
Charging:
o
•
Shock Resistance:
Receiver
•
Antenna:
•
Power Supply:
•
Power Consumption:
During full charging:
•
Outputs:
Deadman output.
o
Interlock, output when transmitter is in the charging station.
o
Timer warning signal.
o
Beeper warning output.
o
Normally closed output, opens when STOP is activated.
o
•
Inputs:
External STOP
o
External Override
o
•
Transmitter charging: Front panel charging station for transmitter, max current 50mA.
•
Connections:
•
Controls:
•
Indicators:
•
Housing:
•
Dimensions:
•
Weight:
D RC AS
ELTA
2,4 GHz
GFSK
Digital coding, 65.536 different pre-set codes from manufacturer.
Three functions, Deadman, STOP and one extra.
-20 to +50º C. For lower temperature, contact manufacturer.
-40 to +65º C.
0 to +50º C.
1 m free-fall on concrete floor.
External standard aerial, 14,5 cm long.
With FME connector on receiver top.
11 to 27 V DC. Voltage above 35VDC shuts down the receiver.
Standby: 55mA.
110mA.
Semiconductor. 2A, each. 12/24 V DC output when active.
Screw terminal on PCB connector.
1 push-button CODE, for coding to the transmitter.
Green light diode that indicates power on.
Yellow light diode that indicates recharging and in operation.
ABS polycarbonate, class IP52.
L:160 mm, W: 80 mm, D: 60 mm.
0.3 kg
User and Installation Manual, DE212 GLOBAL
Page 21 of 36
Document 02743