Table of Contents
Advertisement
6. T
D
ECHNICAL
This equipment complies with the following standards:
Europe/EU: ERC 70-03 EN 300-400. USA: FCC 15.249. Japan: STD-T66.
It is in accordance to EU's demands in order to label the equipment with CE.
Transmitters are IECEx approved, according to:
IECEx: IEC 60079-0 Ed.5 and IEC 60079-11 Ed. 5
IECEx certification: IECEx ZLM 13.0005X
General Specification
•
Frequency: 2,4 GHz
•
Modulation: GFSK
•
Coding:
Digital coding, 65.536 different pre-set codes from manufacturer.
•
Functions: Three functions, Deadman, STOP and one extra.
•
Temperature Range: Operational:
Storage:
-40 to +65º C. Charging: 0 to +50º C.
•
Shock Resistance:
Receiver
•
Antenna
External standard aerial, 14,5 cm long. With FME connector on receiver top.
•
Power Supply:
•
Power Consumption: Standby: 55mA.
During full charging
•
Outputs:
Semiconductor. 2A, each. 12/24 V DC output when active.
•
Deadman output.
•
Interlock, output when transmitter is in the charging station.
•
Timer warning signal.
•
Beeper warning output.
•
Normally closed output, opens when STOP is activated.
•
Transmitter charging Front panel charging station for transmitter, max current 50mA.
•
Connections:
•
Controls:
1 push-button CODE, for coding to the transmitter.
•
Indicators: Green light diode that indicates power on.
Yellow light diode that indicates recharging and in operation.
•
Housing:
ABS polycarbonate, class IP52.
•
Dimensions: L:160 mm, W: 80 mm, D: 60 mm.
•
Weight:
0.3 kg
D
RC AS
ELTA
ATA
-20 to +50º C. For lower temperature, contact producer.
1 m free-fall on concrete floor.
11 to 27 V DC. Voltage above 35VDC shuts down the receiver.
110mA.
Screw terminal on PCB connector.
User and Installation Manual, DE212-2S DSD
Page 21 of 24
Document 02481
Advertisement
Table of Contents
