INSTALLATION INSTRUCTIONS OF PRIMA CS (continued)
• Retrieve the carrier assembly from the packing and follow as below. refer Fig. 2.5
Install the coupling to the suspension arm by sliding the guiding shaft (5) in to suspension
•
arm.
• Lock the inclined coupling with the threaded plug (6).
• Secure the Flat Head Safety Screw (M5) using a flat head screw driver in the socket situated in
Suspension arm front coupling as shown as (7) in fig. 2.5. The same is hanged with a tie to
Potentiometer knob.
5.1 SPECIAL INSTRUCTION:
• The joint which connects swivel arm and the column is fitted with a stop to prevent the inner assembled cables.
• The total rotation of the swivel arm is not more than 180° to the column.
• On reaching the stop, do not rotate further, to prevent any tear off or damage to the mechanism.
5.2 ADDITIONAL LOAD
• The load capacity and tilting stability is balanced with a Max. 9.0kg load with standard
supplied parts and accessories.
• Please do not attach additional load.
6128000-795
Fig. 2.5
Prima C/ Prima CS
Prima C/ Prima CS COLPOSCOPE
5
6
Issue 2.2
Printed on November,2020
7
14