5 .
INSTALLATION INSTRUCTIONS OF PRIMA CS
•
Install the left wheel support (A) and Right wheel support (B) on the Centre support base (C) by
tighten the allen screws (1) provided from the bottom of metal plate. Refer Fig-2.3
• Install the column (D) on the base. Engage the column to the indexing screw (E). Align the tapped
hole of the Column in the screw seat, hold the column firmly and tighten the allen screw
(2) from the bottom of the base. Refer Fig. 2.3
A
• Ensure loosening of Swivel arm lock knob (E) and Install the Swivel arm & Suspension arm Assembly
on the upright holding shaft (3). Refer Fig. 2.4
• Lock the Swivel arm with threaded screw (4) from the top. Refer Fig. 2.4
6128000-795
D
C
1
2
(Fig. 2.3)
4
E
3
(Fig. 2.4)
Prima C/ Prima CS
Prima C/ Prima CS COLPOSCOPE
B
1
13
Issue 2.2
Printed on November,2020