Table of Contents
Advertisement
8A.
ELECTRICAL CONNECTIONS PRIMA CS
Connect the power cable to the AC inlet socket
(2) provided on the back of the swivel arm as
shown in the fig.-(i).
Switch on the power from on/off switch (1).
Note:
Power
supply
input 100V - 240V AC, 50/60HZ. To plug in follow
Instruction on electrical label provided at bottom
of the arm as shown (3) here in Fig.-(i).
8.1 REPLACING THE ILLUMINATION SOURCE
Open
the
swivel
arm
optic cable and replace the illumination assembly
A with new assembly. Secure back the arm cover's.
8.2 FUSE REPLACEMENT
The fuse is located with the AC inlet, provided near
the on/off switch. Use a flat head screw driver to
open the fuse compartment. Two fuses are provided
in this, i.e. one is live fuse and second as spare fuse.
Replace the blown fuse with live fuse and secure
back the fuse compartment. For fuse replacement refer
label shown in fig.-(iii).
6128000-795
is
designed
with
universal
cover's.
Detach
the
Prima C/ Prima CS
Prima C/ Prima CS COLPOSCOPE
1
2
fibre
A
On/Off Switch
AC Inlet
3
Fig. (i)
Fig. (ii)
Fig. (iii)
Issue 2.2
Printed on November,2020
16
Advertisement
Table of Contents
