Getting Started
•
Two x1 PCI Express* slots.
Note: There are actually three x1 PCI Express* slots but slot 2 was used for validation purposes. Only
slots 0 and 1 are supported.
Clocking
•
CK-410M and CK-SSCD
•
Battery-backed real time clock
Connector Interface Summary
•
One x16 PCI Express* Video Interface, doubles as an MEC connector to provide access to
dual SDVO ports if PCI Express* is unused
•
Two SATA ports
•
One Ultra ATA (33/66/100) IDE connector supporting up to two IDE devices
•
Eight Universal Serial Bus (USB) 2.0 ports (Five ports provided on rear-panel, three provided
via headers (J6H2, J7E2)
•
Two PCI 2.3 compliant 33 MHz interface connectors
•
PS/2-style keyboard and PS/2 mouse (6-pin mini-DIN) connectors
•
TV Out D-connector at back panel interface
•
LVDS connector on top of circuit board near GMCH (J5F1)
•
One VGA connector provides access to integrated graphics
•
One LAN connector providing 10/100/1000 Mbps connectivity from the Intel 82573E Gigabit
Ethernet Controller
•
One 9-pin serial port connector.
•
One IrDA port (U4A1)
•
Two PCI Express* slots (x1)
•
Two SODIMM connectors on rear side of circuit board
Debug Features
•
Extended Debug Port (XDP) connector
•
On-board Port 80h display
Miscellaneous Features
•
Configurable for ATX 1.1 Power Supply in desktop mode or AC Mobile Brick/Battery Pack
for Mobile Mode
•
ATX Form Factor eight layer PCB
•
AMI* system BIOS
•
Two built-in fan power connectors: Chassis Fan and CPU Fan
•
Power/Reset buttons
•
CMOS clear jumper
•
BIOS recovery jumper
18
®
Mobile Intel
945GM Express Chipset
Development Kit User's Manual