Table of Contents
Advertisement
Description of the Modbus Parameters/Addresses
319 – P4 - Last Error 5
Adjustable
Range:
Properties:
Where Px represents the starter number, associated with the respective RJ45 connector, as shown in
Figure 3.2 on page
NOTE!
It is possible to reset the errors of starters 1 to 4, saved in the memory, through the modbus address
1000. See the item "Factory Reset".
Modbus addresses 320 to 339 show the last five alarms for each starter. Where "alarm 1" represents the most recent
alarm, and "alarm 5" the oldest alarm.
320 – P1 - Last Alarm 1
321 – P1 - Last Alarm 2
322 – P1 - Last Alarm 3
323 – P1 - Last Alarm 4
324 – P1 - Last Alarm 5
325 – P2 - Last Alarm 1
326 – P2 - Last Alarm 2
327 – P2 - Last Alarm 3
328 – P2 - Last Alarm 4
329 – P2 - Last Alarm 5
5
330 – P3 - Last Alarm 1
331 – P3 - Last Alarm 2
332 – P3 - Last Alarm 3
333 – P3 - Last Alarm 4
334 – P3 - Last Alarm 5
335 – P4 - Last Alarm 1
336 – P4 - Last Alarm 2
337 – P4 - Last Alarm 3
5-10 | SCW100
0 to 65535
ro, 16 bit
3-2.
Factory Setting: -
Advertisement
Table of Contents
