Table of Contents
Advertisement
5.15 ERROR AND ALARM LOG
The SCW100 reports up to five errors and alarms for each starter. Errors are automatically saved every 10 minutes,
so you can lose some errors that haven't been saved yet in case the product is turned off. The errors and alarms
are presented in the circular buffer system, that is, the most recent events replace the oldest ones, which are
discarded.
Modbus addresses 300 to 319 show the last five errors of each starter. Where "error 1" represents the most recent
error, and "error 5" the oldest error.
300 – P1 - Last Error 1
301 – P1 - Last Error 2
302 – P1 - Last Error 3
303 – P1 - Last Error 4
304 – P1 - Last Error 5
305 – P2 - Last Error 1
306 – P2 - Last Error 2
307 – P2 - Last Error 3
308 – P2 - Last Error 4
309 – P2 - Last Error 5
310 – P3 - Last Error 1
311 – P3 - Last Error 2
312 – P3 - Last Error 3
313 – P3 - Last Error 4
314 – P3 - Last Error 5
315 – P4 - Last Error 1
316 – P4 - Last Error 2
317 – P4 - Last Error 3
318 – P4 - Last Error 4
Description of the Modbus Parameters/Addresses
5
SCW100 | 5-9
Advertisement
Table of Contents
