Can-Am Spyder RT Series Instructions Manual page 17

rbl2010-002-305
16. Remove upper and middle retaining screws
from front fascia (both sides).
rbl2014-004-040_a
TYPICAL
1. Front fascia
2. Upper retaining screw
3. Middle retaining screw
17. Remove lower retaining screws and washers
from front fascia.
rmr2010-038-024_a
TYPICAL
1. Lower retaining screw
18. Remove front fascia from vehicle.
PREDELIVERY
rbl2014-004-011_a
19. Turn up and store all wiring and connectors
in front of vehicle to prevent them from be-
ing caught between the frame and front cargo
module.
rbl2014-004-014_b
20. Remove 3 plastic rivets from LH air duct trim
panel (low beam headlight trim panel on CE
models).
rbl2014-004-042_a
1. Plastic rivets to remove (3)
21. Unhook metal retaining clip from inside panel.
2014-1
PARTS TO BE INSTALLED
17 / 52