Menu Items; Measuring Flue Gasses - Kane 358 Manual

MENU ITEMS

MENU ITEM MENU TEXT
TIME
DATE
HEADER
REPORTS
EFFICIENCY
GAS SCALE
PRINTER TYPE
02 REF
LANGUAGE
CODE

MEASURING FLUE GASSES

After the countdown is finished and the analyser is correctly set up, put
its flue probe into the appliance's sampling point. The tip of the probe
should be at the centre of the flue. Use the flue probe's depth stop cone
to set the position.
With balanced flues, make sure the probe is positioned far enough into
the flue so no air can "back flush" into the probe.
WARNING
Ensure the flue probe handle does not get hot!
TIME
E.g.. 7am = 07:00:00, 7pm = 19:00:00
DATE
HEADER Edit the 2 Line Header on your printouts.
REPORTS
EFF
Select, ppm, ppm(n), mg/m3, mg/m3(n),
ppm/mg
IR PRINT
Use for "Normalised" readings - Default
02 REF
LANG
CODE
OPTIONS/COMMENTS
HH:MM:SS format
DD/MM/YY format
View current memory usage & view
stored reports.
Efficiency calculation analyser is
set to Gross or Net —
Condensing automatically selected
based on selected fuel type
mg/kWh, mg/kWh(n)
Select, KMIRP, IRP-2
set to 3%, can adjust up or down
Selects your required language
Password protected for
authorised service agents only -
Default to 000000
KANE 358 MANUAL 17