Table of Contents
Advertisement
Available languages
Available languages
injury.
Failure to obey this safety warning CAN result in death or serious injury to yourself or
to others. Always follow the safety precautions to reduce the risk of fire, electric shock and personal
injury.
Failure to obey this safety warning MAY result in personal injury to yourself or others
or property damage. Always follow the safety precautions to reduce the risk of fire, electric shock and
personal injury.
GENERAL SAFTY RULES
Safety is a combination of common sense, staying alert,
and knowing how your bench drill press works.
TO
COULD CAUSE SERIOUS INJURY, DO NOT PLUG IN
THE BENCH DRILL PRESS UNTIL THE FOLLOWING
STEPS HAVE BEEN READ AND UNDERSTOOD.
1.
READ and become familiar with this entire
instruction manual. LEARN the tool's applications,
limitations, and possible hazards.
2.
AVOID DANGEROUS CONDITIONS. DO NOT use
power tools in wet or damp areas or expose them to rain.
Keep work area well-lit.
3.
DO NOT use power tools in the presence of
flammable liquids or gases.
4.
ALWAYS keep your work area clean, uncluttered,
and well-lit. DO NOT work on floor surfaces that are
slippery with sawdust or wax.
5.
KEEP BYSTANDERS AT A SAFE DISTANCE
FROM the work area, especially when the tool is in
operation. NEVER allow children near the tool.
6.
DO NOT FORCE THE TOOL to do a job for which it
was not designed.
7.
DRESS FOR SAFETY. DO NOT wear loose clothing,
gloves, neckties, or jewellery (rings, watches, etc.) when
operating the tool. Inappropriate items can get caught and
draw you into moving parts. ALWAYS wear non-slip
footwear, and tie back long hair.
8.
WEAR A FACE MASK OR DUST MASK. Drilling into
materials produces dust.
9.
ALWAYS remove the power cord plug from the
power supply outlet when making adjustments, changing
parts, cleaning, or working on the tool.
SAFETY INSTRUCTIONS
AVOID
MISTAKES
THAT
10. AVOID ACCIDENTAL START-UPS. Make sure that
the power switch is in the OFF position before plugging in
the power cord.
11. REMOVE ADJUSTING TOOLS. ALWAYS MAKE
SURE all tools are removed from the bench drill press
before turning it ON.
12. NEVER LEAVE A RUNNING TOOL UNATTENDED.
Turn the power switch to OFF. DO NOT leave the tool
unattended until it has come to a complete stop.
13. NEVER STAND ON A TOOL. Serious injury could
result if the tool tips or is accidentally hit.
DO NOT store anything above or near the tool.
14. DO NOT OVERREACH. Keep proper footing and
balance at all times. Wear oil-resistant rubber-soled
footwear. Keep the floor clear of oil, scrap, and other
debris.
15. MAINTAIN TOOLS PROPERLY. ALWAYS keep
tools clean and in good working order. Follow instructions
for
lubricating
and
Maintenance section.
16. DO NOT operate the tool if you are under the
influence of drugs, alcohol or medication that could affect
your ability to use the tool properly.
17. CHECK FOR DAMAGED PARTS. Check for
alignment of moving parts, jamming, breakage, improper
mounting, or any other conditions that may affect the tool's
operation. Any part that is damaged should be properly
repaired or replaced before use.
18. MAKE THE WORKSHOP CHILDPROOF. Use
padlocks, master switches, and ALWAYS remove starter
keys.
CERTAIN MATERIALS CAN BE HAZARDOUS TO
21
changing
accessories.
DUST
GENERATED
See
FROM
Advertisement
Table of Contents
