Status Information Handheld; Reconditioning - Bosch vivatmo pro Instructions For Use Manual

7.2

Status information handheld

Your handheld 234094758
is connected
29
QC Status
valid
Successful measurements
4755
01.01.2018
Measurement trials left Latest QC date
7.3

Reconditioning

Vivatmo pro performs an automatic stability check with the first measurement of the day: If the Vivatmo pro device has been
stored in warm and humid environment or not been in use for a longer time, the wrench symbol may appear on the basestation
and the handheld. Then a reconditioning is required to provide consistent measurement performance. In this case the wrench
symbol appears during the regeneration process on the screen and the device automatically starts the reconditioning.
The number of measurement trials you can perform with one Vivatmo pro handheld
is limited.
4. Slide up the handheld connected icon
5. If required, change the handheld, see "5.1.1 Assigning the handheld" in
Administration instructions.
1. The wrench symbol on the handheld and the basestation indicates that the
reconditioning process is on going. The remaining reconditioning time is
shown in minutes.
2. The handheld beeps and blinks 3 times blue when reconditioning is finished.
3. Dispose mouthpiece after reconditioning.
Instructions for use
Maintenance and troubleshooting
4
C O N T I N U E
to view the number of trials left.
© Bosch Healthcare Solutions GmbH
en
en
en
en
en
en
en
en
en
en
en
en
43