Settings; Ambient No - Bosch vivatmo pro Instructions For Use Manual

Settings

6 Settings
en
The access to settings depends on the login as professional or administrator, see "3.2.1 User concept".
en
G E N E R A L
en
Welcome to Vivatmo pro, Jouko Kinnunen
A M B I E N T N O
P E R F O R M Q C
en
I N F O R M AT I O N
M A N A G E
A D M I N I S T R AT I O N
S T A R T N E W
en
M E A S U R E M E N T
L O G O U T
en
6.1

Ambient NO

en
Ambient NO measurement may help to interpret FeNO measurement results. To perform an ambient NO measurement:
en
1. In the Settings menu, select AMBIENT NO. The AMBIENT MEASUREMENT screen opens.
en
2. Turn on the handheld and attach a new mouthpiece, see "4.1 Measurement using the basestation".
3. Lay down the handheld in a way that the device has good access to the ambient air.
en
4. Select the RUN MEASUREMENT button.
On the screen, you see that the ambient NO measurement is running.
en
5. When the ambient NO measurement is done, you see the result on the screen. Remove the mouthpiece.
en
34
1. On the Home screen, select the Settings menu.
Following options are available:
•
•
M A N A G E
•
P A T I E N T S
A N D R E S U LT S
•
•
© Bosch Healthcare Solutions GmbH
General Settings to change the brightness of the display.
Ambient NO to perform an Ambient NO measurement,
see "6.1 Ambient NO".
Perform QC, see "6.2.2 Performing QC".
Information, see "6.3 System information".
Administration, see Administration instructions.
Instructions for use