Power Supply; Led Status Lights; Vci Manager Launcher; Vci Manager - Bosch SAIC VDI III Operating Instruction

en 10 | VDI III | Product description
4.6.2

Power supply

VDI III is designed to be supplied with power
from the vehicle battery by the diagnostic con-
nection cable. For data transfer or a system
update, VDI III can also be supplied with volt-
age from the USB port on a computer.
i
If VDI III is to be configured for a wireless
connection, power must be supplied by USB
connecting cable.
4.6.3

LED status lights

Four light-emitting diodes (LEDs) are located
on the front of VDI III. The LED indicators pro-
vide the following status information.
Symbol Color LED function
Status
Green VDI III without errors
Error occurred, perform a
Red
reset
VDI III connected to vehicle
Green
Flashing Not connected to external 12
red or 24 V voltage supply
Off VDI III without errors
Error occurred or VDI III in re-
Red
covery state
VDI III not connected to a
Off
computer
Flashing VDI III connected to computer
green
VDI III off
Off
VDI III on
Green
Yellow/ Depending on user software
green
Yellow/ Depending on user software
green
|
1 689 989 458 2020-01-01
4.7

VCI Manager Launcher

The Windows program "VCI Manager Launcher"
running on the host computer can be used by
the user to select various VCIs in the network.
After VCI selection, further settings can be
made directly in VCI Manager. For this purpo-
se, VCI Manager Launcher opens VCI Manager
automatically.
4.8

VCI Manager

The "VCI Manager" Windows program running
on the host computer can be used by the user
to configure and update VDI III. Also, "VCI
Manager" is used to configure the connection
between the diagnostic device and the host
computer and to update the firmware of the
diagnostic device.
4.9

System requirements

The "VCI Manager" software is used to set up
and update VDI III. "VCI Manager" is installed
on a computer. VDI III is controlled by way of
the associated user software.
i
The system requirements listed below refer
to the use of the "VCI Manager" software.
The user software requirements may differ.
R
Windows 7, Windows 8 or Windows 10 (32-
bit and 64-bit)
R
100 MB free hard disk space
R
512 MB RAM
R
1 GHz processor
R
1 free USB port
R
1024x768 display resolution
Robert Bosch GmbH