Tools; Led Status Lights - Bosch LTE 65EU Manual

4 | Tools

12 / 28
4 Tools

4.1 LED Status Lights

– The LTE 65 has 3 LED status lights providing information on the LTE 65's connection,
data type, and signal strength.
– At device power on, the life LED will turn blue indicating boot. After boot an LED func-
tion check will occur where all three LEDs will cycle through Red, Green, and Blue for
0.5 seconds each.
– If there is an initialization error, all three LEDs will turn red and the device will reset it-
self.
– After the LED function check is complete, the table below can be used to understand
device information provided by the LEDs.
Life LED
Data LED
WAN LED
Telemetry System LTE 65 Manual
Blue solid
Boo ng
Green blinking
Cloud connec on in progress
Red solid
No cloud connec on
Green solid
Cloud connec on
Green blinking
Ethernet data INTO device
Violet blinking
RS232 data INTO device
Blue blinking
Ethernet data OUT of device
Red blinking
RS232 data OUT of device
Red solid
SIM / Cell network error
Red blinking
Connec ng to cell network
Green blinking
Connected to cell network, signal good
Blue blinking
Connected to cell network, signal ok
Violet blinking
Connected to cell network, signal bad
Bosch Motorsport