Advertisement
Operating Instructions
‡Operation
(for ME96SSH-MB)
»Display Change
Press
, the measurement display switches over.
DISPLAY
Example of changing display (Three phase 4-wire system; display pattern: P01; no additional screens)
DISPLAY
<Screen 1 of 4>
<Screen 2 of 4>
Upper: Current
Upper: Current
Middle: Power
Middle: Power
Lower: Voltage
Lower: Power factor
Bar Graph Display
»
Items measured can be displayed on the bar graph. By displaying one item by a bar graph and other three items by digital numbers
four elements can be displayed at once.
• Bar graph explanation
The
or
mark indicates that the measurement item is displayed on the bar graph.
• Select bar graph
Press the
or
button to select the measurement items to be displayed on the bar graph.
Three phase 4-wire system
V
(LN)
(Upper)
AVG
(Middle)
(Lower)
»Maximum/Minimum Display Values
Press the
MAX/MIN
button to change to the maximum and minimum values
of the display screen. Press it again to return to the current value display screen.
Reset Maximum/Minimum Values
»
Press the
button for 2s to reset the maximum/minimum values of
RESET
the measurement items displayed. The maximum/minimum values will
become the current values.
Press the
and
RESET
maximum/minimum values. The maximum/minimum values will become the current values.
»Displaying Active energy/Reactive energy/Apparent energy
Active energy (Imported)
Reactive energy
(Imported,lag)
Change the unit (M, k, none) or increase the digits in the bottom display for power used/reactive power used/apparent power
used/time-based power used to check the lower/higher-order digits. Push the
between screens.
Power used (receiving): Example of changing 012,345,678,901,234.567Wh
Unit: M
Reset Active energy/Reactive energy/Apparent energy
»
Press the
,
SET
RESET
active energy/reactive energy/apparent energy (this operation only works on the current value display screen).
19
DISPLAY
DISPLAY
<Screen 3 of 4>
<Screen 4 of 4>
Upper: Current
Upper: Current
Middle: Power factor
Middle: No display
Lower: Voltage
Lower: N-phase current
(clockwise)
(anticlockwise)
V
(LL)
A
AVG
AVG
∑PF
Hz
buttons simultaneously for 2s to reset all
Active energy (Exported)*
Apparent energy
Reactive energy
Reactive energy
(Imported,lead)*
(Exported,lag)*
Press
and
for 2s
Bottom digits increased
and
buttons simultaneously for 2s to reset all of the following together:
PHASE
»Changing Phases
Press
, the current phase and the voltage phase switches over.
PHASE
Example of changing phases (Three phase 4-wire system)
DISPLAY
PHASE
Average current
Power (total)
Average voltage (interphase)
PHASE
PHASE
Current phase 3
Power phase 3
Voltage phase 31
∑W
∑var
* To display these screens,
it is necessary to change
the power used measurement
settings using set-up menu 3.
Reactive energy
(Exported,lead)*
and
Unit: None
PHASE
Current phase 1
Current phase 2
Power phase 1
Power phase 2
Voltage phase 1N
Voltage phase 2N
PHASE
Current phase 2
Current phase 1
Power phase 2
Power phase 1
Voltage phase 23
Voltage phase 12
Example of bottom item
Example of power factor
displayed in the bar graph
displayed in the bar graph
Example of switching between changing current value
display and maximum/minimum value display screens
MAX/MIN
Current value display screen
buttons simultaneously for 2s to switch
Unit: k
PHASE
Current phase 3
Power phase 3
Voltage phase 3N
PHASE
PHASE
Average current
Power (total)
Average voltage
(between lines)
Maximum/Minimum value
display screen
Advertisement
