Connecting The Power Supply - Endress+Hauser Proline Prosonic Flow 93 Brief Operating Instructions

Installation
3.4.3 Panel mounting
3.5

Connecting the power supply

#
Warning!
Risk of electric shock. Components carry dangerous voltages.
• Never mount or wire the measuring device while it is connected to the power supply.
• Before connecting the power supply, check the safety equipment.
• Route the power supply cable so that it is seated securely.
• Seal the cable entries and covers tight.
• When wiring Ex-certified measuring devices, all the safety instructions, wiring diagrams,
technical information, etc. of the related Ex documentation must be observed
 Ex documentation on the CD-ROM.
"
Caution!
Risk of damaging the electronic components!
Connect the power supply in accordance with the connection data on the nameplate.
3.5.1 Connecting the transmitter
Wire the unit using the terminal assignment diagram inside the cover.
2
10
mm (inch)
Transmitter connection:
1 Connection compartment cover
(connection diagram on the inside)
2 Power supply cable
1
A0010773
Proline Prosonic Flow 93
+0.5 (+0.019)
–0.5 (–0.019)
210 (8.27)
+0.5 (+0.019)
–0.5 (–0.019)
245 (9.65)
~110 (~4.33)
Endress+Hauser
A0007544