Table of Contents
Advertisement
Fi g ur e A
Loosen
Pu l l
Pu s h
1 4
ADJUSTMENTS GUIDE
Fi g ur e B
P u l l
Tighten
MOVING THE ROWER AFTER FOLDING
Press
Transportation
Stabilizer (No. 27) touch the ground. Once the
Transportation Wheels (No. 29) are on the
ground, you can transport the rower to the desired
location with ease.
PEDAL STRAP ADJUSTMENT
The Pedal Strap (No. 137) is adjustable and can
be personalized to fit the user's foot size. Directions
on how to loosen and tighten the straps are shown
in figures A and B.
MOVING THE ROWER
To move the rower, lift up Rear Stabilizer (No. 34)
until the Transportation Wheels (No. 29) on Front
Stabilizer (No. 27) touch the ground. Once the
Transportation Wheels (No. 29) are on the
ground, you can transport the rower to the desired
location with ease.
down
Sliding
Wheels
ADJUSTING THE RESISTANCE
Rotate the Tension Knob (No. 14) clockwise to
increase the level of resistance. Rotate the
Tension Knob (No. 14) counter-clockwise to
decrease the level of resistance.
Tension levels are set at Level 1 being the lowest
and Level 8 being the highest.
10
Rail
(No.
35)
(No.
29)
on
Front
until
Advertisement
Table of Contents
