Setting An Individual Time Program - Viessmann VITOTROL 100 Operating Instructions Manual

DHW heating
Selecting the time program
Time phase Start
3 12:00
4 14:00
5 18:00
6 23.00
Time program 3 Prog 3
–
Monday to Friday
Time phase Start
1 05:30
2 08:00
3 12:00
4 14:00
5 18:00
6 22:00
Saturday and Sunday
Time phase Start
1 06:30
2 08:00
3 12:00
4 14:00
5 18:00
6 23.00

Setting an individual time program

Setting time phases
In the preset time programs "Prog 1" to "Prog 3", the
day is split into 6 time phases.
For every enabled time phase, the following must be
entered:
Start time
■
Stop time
■
Operating modes "Enable", "Block"
■
You can select time phases for several days (day
groups) or for individual days:
"MO SU" for the same time phases every day of the
–
■
week
"MO FR" for the same time phases Monday to Fri-
–
■
day
"SA SU" for the same time phases on Saturday and
■ –
Sunday
"SINGLE DAY" different time phases for individual
■
days
Note
Settings for individual days take priority over settings
for several days.
01. Open the flap.
14
(cont.)
End
14:00
18:00
23.00
06:30
End
08:00
12:00
14:00
15:30
22:00
05:30
End
08:00
12:00
14:00
18:00
23.00
06:30
02. Press
03. With / select "Settings".
04. Confirm with OK.
05. With / select "Programs".
06. Confirm with OK.
07. Select the program you want to change with /
08. Confirm with OK.
09. Select "DHW" with / .
10. Confirm with OK.
11. With / select "Set".
12. Confirm with OK.
13. Set the required group of days/individual day with
Operating mode
Release
Release
Release
Block
Operating mode
Release
Block
Block
Block
Release
Block
Operating mode
Release
Release
Release
Release
Release
Block
twice.
(e.g. "Prog 1").
/ .