Viessmann VITOTROL 100 Operating Instructions Manual page 15

Selecting the time program
14. Confirm with OK.
15. Set the required time phase or initially the required
day with / .
16. Confirm with OK.
17. With / set the required start time, stop time and
the temperature, one after the other and the oper-
ating mode (e.g."Lock").
18. Confirm respectively with OK.
19. Proceed as described in points 15 to 18 to set fur-
ther time phases.
Note
Should gaps be created between the time phases,
these are closed automatically by extending the
previous time phase.
Disabling time phases
To disable a time phase, set the same value for the
start and stop times.
Copying a time program
You can copy time programs, for example to make a
new time program from another where only minor
changes are required.
01. Open the flap.
02. Press twice.
03. With / select "Settings".
04. Confirm with OK.
05. With / select "Programs".
06. Confirm with OK.
07. Select the program you want to change with /
(e.g. "Prog 1").
08. Confirm with OK.
09. Select "DHW" with / .
10. Confirm with OK.
11. With / select "Copy from".
12. Confirm with OK.
13. With / select the program you want to copy.
14. Confirm with OK.
(cont.)
15. With / select "Set" to make changes.
DHW heating
15