Dhw Heating; Starting And Stopping Dhw Heating; Selecting The Time Program - Viessmann VITOTROL 100 Operating Instructions Manual

Starting and stopping DHW heating

1. Open the flap.
2. Press twice.
3. With / select "Manual".

Selecting the time program

You can choose between 3 preset time programs.
They are saved in the programs "Prog 1" to "Prog 3"
(see page 7).
In the time programs, there is a changeover between
operating modes "Enable" and "Block".
Preset time programs
Time program 1 Prog 1
–
Monday to Friday
Time phase Start
1 05:30
2 08:00
3 12:00
4 14:00
5 18:00
6 22:00
Saturday and Sunday
Time phase Start
1 06:30
2 08:00
3 12:00
4 14:00
5 16:00
6 23.00
Time program 2 Prog 2
–
Monday to Friday
Time phase Start
1 05:30
2 08:00
3 12:00
4 14:00
5 15:30
6 22:00
Saturday and Sunday
Time phase Start
1 06:30
2 08:00
4. Confirm with OK.
5. With / , select "ON" or "OFF" for "DHW".
6. Confirm with OK.
Note
You can change the time programs in accordance with
your individual preferences (see page 14).
End Operating mode
08:00 Release
12:00 Release
14:00 Release
18:00 Release
22:00 Release
05:30 Block
End Operating mode
08:00 Release
12:00 Release
14:00 Release
16:00 Release
23.00 Release
06:30 Block
End Operating mode
08:00 Release
12:00 Block
14:00 Block
15:30 Block
22:00 Release
05:30 Block
End Operating mode
08:00 Release
12:00 Release

DHW heating

13