Definitions / Glossary - PROLEC PME100 User Manual

17 Definitions / Glossary

Definitions of words used to ensure understanding
P/N
Arm
Artic
Attachment
Angle sensor
Blade
Bucket
Boom
CAN cable
Counterweight
MMI
Motion Cut
Pitch
Power Supply
Pivot pin
Roll
Ram
SC
Stabiliser
Slew restriction
Slew limit
Track
Tracked excavator
Turret
Undercarriage
Wheeled excavator
562100-000, Issue1.1, December 2015
Part Number
Second articulation (stick)
Second articulation of a hydraulically adjustable boom (luffing
boom, knuckle boom, two piece boom)
Tool fixed to the dipper other than a bucket
Sensor detecting current equipment angle
heavy metal plate on the front of the machine, used for stability
and moving material
Digging attachment
First articulation connected to turret
Cable connecting system components
Weight attached to the rear of an excavator to increase digging
force and lifting capacity
Man Machine Interface (i.e. Display)
Direct control of component hydraulic service
Longitudinal base machine angle (fore / aft)
DC supply voltage
Point at which the articulations rotate about
Lateral base machine angle (side to side)
Hydraulic Cylinder
Safety Controller
Hydraulically powered arms that can be lowered and raised to
increase the Stability of the machine
Angular slew, virtual wall, multipoint wall
An adjustable angle or virtual wall setting
continuous band of treads, metal or rubber covered
An excavator fitted with tracks
Section of machine above the undercarriage
Section which the tracks/wheels attach too
An excavator fitted with wheels
33 of 36