11.1 Relay Function Test
11.2 Sensor Data
Boom Actual = Boom angle
Linkage Actual = Tool angle
562100-000, Issue1.1, December 2015
To test the relays and motion cut valves use the blue arrow to
highlight the appropriate output. When highlighted no motion for
that service should be possible.
Input signals are indicated by the LED lamp status.
Angle values in the Actual column represent the angles of the
monitored parts of the machine.
Arm Actual = Arm angle
Operate / show status
of feature
Exit to previous menu
Exit to previous menu
24 of 36