User Login - PROLEC PME100 User Manual

5.3 User Login

PME may be configured to work with the built-in user list. If so, the system will prompt for
a user login pass code after acknowledging the safety warning screen. Select the user
name required and the login code screen will appear.
Using the Arrow icon buttons, enter a valid pass code. The previous pass code digit will
be replaced with a star as the code is entered. Press the Tick icon button to confirm the
login pass code. If a valid pass code is entered the system will commence normal opera-
tion.
Logging out is described in section 5.5
Exit Login
Cancel without change
Moves highlighter to
left or Hold to delete
digit
Accept displayed value
If an incorrect login code is entered, a failure screen will be
displayed. Press the Tick icon button to return to the Select
User screen.
562100-000, Issue1.1, December 2015
Moves highlighter UP
Select highlighted
name to open the En-
ter Login Code screen
below
Moves highlighter
DOWN
Increases highlighted
digit
Moves highlighter to
right
Decreases highlighted
digit
11 of 36