Table of Contents
Advertisement
7.1.4 Machine Envelope Indicator (MEI) - Height
If any of the equipment enters the approach limit* an 'Approaching max height' message
will appear, the internal alarm will sound and the amber LED will be lit.
*The approach limit is configurable at point of calibration, check system operation before
commencing work.
the red LED will be lit. The limit cannot be deactivated if in the alarm state.
Observe the operational limitations given in section 4.
562100-000, Issue1.1, December 2015
If any of the equipment exceeds the set limit a 'Max height ex-
ceeded' message will appear, the internal alarm will sound and
MEI systems will not cut
motion to any section of
equipment that has
reached a limit. This can
lead to the a breech of the
set limit.
19 of 36
Advertisement
Table of Contents
