Troubleshooting Diagnostics; Factory Test Procedure; To Enter Factory Test Procedure; To Exit Factory Test Procedure - ALLIANCE AWN43RSN115CW01 Instruction Manual

Troubleshooting Diagnostics

Factory Test Procedure

It is helpful to run the Factory Test Procedure first to diagnose the
machine's issue. This procedure tests all machine features and
operations.

To Enter Factory Test Procedure

1. Disconnect electrical power from unit.
2. Reconnect electrical power to unit.
3. Wait about 10 seconds.
4. Turn Cycle Selection knob to opposite of Normal Eco. Stay
on that selection for at least one second.
5. Press and hold the Start/Pause button.
Display
Number (LEDs lit)
0 All LEDs lit
1 Refer to Cycle
Switch Test
2 Refer to Tem-
perature
Switch Test
3 Refer to Load
Size Switch
Test
4 Refer to Extra
Rinse Test
5 Refer to Lid
Switch Test
6 Wash
7 Rinse
8 Wash, Rinse
9 Lid Lock
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
Factory Test Procedure Quick Reference Chart
Motor Valves
Off None
Off None
Off None
Off None
Off None
Off None
Off Hot
Off Cold
Off Hot, Cold
Off None
Table 1 continues...
6. Change Cycle Selection knob to Normal Eco within 5 seconds
or Start press will be invalid.
7. Stay on Normal Eco for at least one second. Control will enter
Factory Test Mode.
8. To advance through the sequence of test steps press the Start/
Pause button. Refer to Table 1 for all tests in the Factory Test
Procedure.

To Exit Factory Test Procedure

To exit the Factory Test Procedure, refer to Exit column in Table
1 and Exit Key in Table 2.
Lid Pump
Unlocked Off
Unlocked Off
Unlocked Off
Unlocked Off
Unlocked Off
Unlocked Off
Unlocked Off
Unlocked Off
Unlocked Off
Locked Off
10
Troubleshooting Diagnostics
Exit Step
1 Show Mode
3 and then 1 Cycle Switch
3 and then 1 Temperature
Switch
3 and then 1 Load Size
Switch
3 and then 1 Extra Rinse
10 and then 1 Lid Switch
1 Hot Fill
1 Cold Fill
2 and then 1 Pressure Sen-
sor Fill
7 and then 1 Lid Lock
Check
Part No. 204666ENR1