Setting The Operating Program; Setting A Time Program - Viessmann VITOTRANS 353 Operating Instructions Manual

Setting the room temperature
Press the following keys:
1. for the "Extended menu".
å
2. / to select "Heating".
| ~
3. to confirm.
d
4. / to select "Heating circuit 1" (HC1), "Heat-
Ù Ú
ing circuit 2" (HC2) or "Heating circuit 3"
(HC3, if installed).

Setting the operating program

Check if "Heating" is set for the relevant heating cir-
cuit.
Heating circuit 1
Set room temp.
Heating program
Party mode
Economy mode
Select with
Fig. 22
Press the following keys in the standard menu:
1. / for "Heating"
| ~
2. to confirm.
d

Setting a time program

The times at which the heating circuit delivers central
heating with standard or reduced room temperature
depends on the setting of the switching times for the
relevant day (4 possible time phases).
■ If one or more time phases are set, central heating
with standard room temperature is active during
those times.
■ If no time phases are set, central heating is carried
out to the reduced room temperature for the whole
day.
Press the following keys:
1. for the "Extended menu".
å
2. / to select "Heating".
| ~
(cont.)
HC1
5. / for "Set red room temp".
| ~
6. to confirm.
d
7. / for the required temperature.
| ~
8. to confirm.
d
"Adopted" appears briefly in the dialogue
line of the display.
9. until the default display is shown.
ä
3. / to select "Heating circuit 1" (HC1), "Heat-
Ù Ú
ing circuit 2" (HC2) or "Heating circuit 3"
(HC3, if installed).
4. / for "Operating program".
| ~
5. to confirm.
d
The check mark must be next to "Heating".
If not, proceed as follows:
6. / for "Heating".
| ~
7. to confirm.
d
8. until the default display is shown.
ä
■ The rooms of the selected heating circuit are heated
in accordance with the room temperature and time
program settings.
3. to confirm.
d
4. / to select "Heating circuit 1" (HC1), "Heat-
Ù Ú
ing circuit 2" (HC2) or "Heating circuit 3"
(HC3, if installed).
5. / for "Heating time program".
| ~
6. to confirm.
d
7. / for adjusting the required time. (see sections
| ~
below)
8. until the default display is shown.
ä
Central heating
25