Setting The Operating Program; Setting A Time Program - Viessmann VITOLIGNO 300-C Operating Instructions Manual

Central heating
Setting the room temperature
Set the room temperature for reduced heating
mode (night setback)
Heating circuit 1
Set room temp.
Set red. room temp.
Heating program
Party mode
Select with
Fig. 13
Press the following keys:
1. for the "Extended menu".
å
2. / to select "Heating".
| ~

Setting the operating program

Check if "Heating" is set for the relevant heating cir-
cuit.
Heating circuit 1
Set room temp.
Heating program
Party mode
Economy mode
Select with
Fig. 14
Press the following keys in the standard menu:
1. / for "Heating"
| ~
2. to confirm.
d

Setting a time program

The times at which the heating circuit delivers central
heating with standard or reduced room temperature
depends on the setting of the switching times for the
relevant day (4 possible time phases).
■ If one or more time phases are set, central heating
with standard room temperature is active during
those times.
If no time phases are set, central heating is carried
■
out to the reduced room temperature for the whole
day.
18
(cont.)
HC1
HC1
3. to confirm.
d
4. / to select "Heating circuit 1" (HC1), "Heat-
Ù Ú
ing circuit 2" (HC2) or "Heating circuit 3"
(HC3, if installed).
5. / for "Set red room temp".
| ~
6. to confirm.
d
7. / for the required temperature.
| ~
8. to confirm.
d
"Adopted" appears briefly in the dialogue
line of the display.
9. until the default display is shown.
ä
3. / to select "Heating circuit 1" (HC1), "Heat-
Ù Ú
ing circuit 2" (HC2) or "Heating circuit 3"
(HC3, if installed).
4. / for "Operating program"
| ~
5. to confirm.
d
The check mark must be next to "Heating".
If not, proceed as follows:
6. / for "Heating".
| ~
7. to confirm.
d
8. until the default display is shown.
ä
The rooms of the selected heating circuit are heated in
accordance with the room temperature and time pro-
gram settings.
Press the following keys:
1. for the "Extended menu".
å
2. / to select "Heating".
| ~
3. to confirm.
d