Setting The Operating Program For Central Heating; Time Program - Viessmann VITOLIGNO 300-H Series Operating Instructions Manual

Central heating
Room temperature
Setting the reduced room temperature (night setback)
Heating circuit 1
Set room temp.
Set red. room temp.
Heating program
Party mode
Select with
Fig. 12
Press the following buttons:
1. for the "Extended menu".
å
2. / to select "Heating".
| ~
Operating program

Setting the operating program for central heating

Check if "Heating" is set for the relevant heating cir-
cuit.
Heating circuit 1
Set room temp.
Heating program
Party mode
Economy mode
Select with
Fig. 13
Press the following buttons:
1. repeatedly until the "standard menu" is dis-
ä
played.
2. / for "Heating".
| ~

Time program

Setting the time program for central heating
The time when the heating circuit delivers central heat-
ing with standard or reduced room temperature is
dependent on the settings of the switching times for
the relevant day (4 possible time phases).
18
(cont.)
HC1
HC1
3. to confirm.
d
4. / to select "Heating circuit 1" (HC1), "Heat-
Ù Ú
ing circuit 2" (HC2), "Heating circuit 3"
(HC3) or "Heating circuit 4" (HC4, if instal-
led).
5. / For "Set red room temp".
| ~
6. to confirm.
d
7. / for the required temperature.
| ~
8. to confirm.
d
"Adopted" appears briefly in the dialogue
line of the display.
3. to confirm.
d
4. / to select "Heating circuit 1" (HC1), "Heat-
Ù Ú
ing circuit 2" (HC2), "Heating circuit 3"
(HC3) or "Heating circuit 4" (HC4, if instal-
led).
5. / for "Operating program".
| ~
6. to confirm.
d
The check mark must be next to "Heating".
If not, proceed as follows:
7. / for "Heating".
| ~
8. to confirm.
d
The rooms of the selected heating circuit are heated in
accordance with the room temperature and time pro-
gram settings.
If one or more time phases are set, central heating
■
with standard room temperature will be active for
those times.
■ If no time phases are set, central heating will be ena-
bled for the whole day with reduced room tempera-
ture.