Required settings
If you want DHW heating, check the following points:
■
Have you set the required set DHW temperature?
For settings, see page 33.
■
Have you set the correct operating program?
For settings, see page 33.
Setting the DHW temperature
Press the following keys in the standard menu:
1.
/
for "DHW"
|
~
2.
to confirm.
d
3.
/
for "Set temperature".
|
~
4.
to confirm.
d
Setting the operating program
Heating program
DHW
Standby mode
Select with
Fig. 33
Press the following keys in the standard menu:
1.
/
for "DHW".
|
~
Setting the time program
When DHW heating is enabled for the heating circuit
depends on the settings of the switching times for the
respective day (4 possible time phases).
■
The time program for DHW heating is made up of
time phases. A time phase from 06:00 to 22:00 h
every day is set at the factory.
■
Automatic mode is set at the factory for DHW heat-
ing.
■
If you don't want automatic mode, you can select up
to 4 individual time phases per day for DHW heat-
ing. For each time phase you set the start and end
points.
■
In the "Extended menu", you can call up the current
time program under "Information" (see page 39).
■
Have you set the required time program?
For settings, see page 33.
5.
/
for the required temperature.
|
~
6.
to confirm.
d
"Adopted" appears briefly in the dialogue
line of the display.
7.
until the default display is shown (see
ä
page 21).
2.
to confirm.
d
3.
/
for "Operating program".
|
~
4.
to confirm.
d
5.
/
for "DHW" or "Standby mode".
|
~
6.
to confirm.
d
7.
until the default display is shown.
ä
Settings in the extended menu:
1.
for the "Extended menu".
å
2.
/
for "DHW"
|
~
3.
to confirm.
d
4.
/
for "Time prog DHW"
|
~
5.
to confirm.
d
6.
/
for "Individual"
|
~
DHW heating
33