Table of Contents
Advertisement
Further adjustments
Changing the set value of residual oxygen content
Only change this setting in consultation with a heating
contractor or let a heating contractor change it.
In the delivered condition, the min. set value is 7 %.
Press the following keys in the standard menu:
1.
for the extended menu
å
2.
/
for "Boiler"
|
~
3.
to confirm.
d
Restoring the factory settings
You can individually restore all modified values for
each heating circuit to their factory setting.
1.
for the "extended menu"
å
2.
/
for "Settings"
|
~
3.
to confirm.
d
4.
/
for "Standard settings"
|
~
5.
to confirm.
d
6.
/
for selecting the required sub-menu.
|
~
The available options are "General",
"Boiler", "Heating" or "DHW".
Select the required heating circuit under
"Heating" with
7.
to confirm.
d
8.
/
to change "No" to "Yes"
|
~
9.
until the default display is shown.
ä
The following settings and values are reset:
Set room temperature
■
■
Set DHW temperature
■
Time program for central heating
■
Time program for DHW heating
Party mode is deleted
■
Economy mode is deleted
■
■
Holiday program is deleted
■
Heating curve slope and level
38
/
and continue.
Ù
Ú
4.
/
for "Flue gas residual O2"
|
~
5.
to confirm.
d
6.
/
for the required value.
|
~
7.
to confirm.
d
8.
until the default display is shown.
ä
Advertisement
Table of Contents
