Advertisement
Advertisement
Table of Contents
Related Manuals for WATSON Haven Perch
Summary of Contents for WATSON Haven Perch
- Page 1 ASSEMBLY Haven Perch Tables 360.394.1300 watsonfurniture.com V.21.0 12/2021...
- Page 2 Perch Table Components Surfaces Bridge Legs Support Rails Bag Hooks Foot Bar Tubes 2 HAVEN PERCH TABLES ASSEMBLY INSTRUCTIONS...
- Page 3 1/4 - 20 X 3.5” Bolt Tite-Joint (0002146) Connector (490006) For two-piece sur face tables only Tools 3mm Hex Bit Electric Drill T25 Tor x Bit 4mm Hex Bit 13mm Wrench Some steps require two people to assemble properly. 3 HAVEN PERCH TABLES ASSEMBLY INSTRUCTIONS...
- Page 4 Lay out the bridge legs and support rails in the general shape of the structure, shown below. Slide the support rails into the bridge leg brackets and secure each end with (2) screws. M6-1.0 X 12mm (125285) 4 HAVEN PERCH TABLES ASSEMBLY INSTRUCTIONS...
- Page 5 Have one person hold the foot bar steady while another secures it in place. Drive one screw (0002150) through each tab to affix the Foot Bar (b.). M6 - 1.0 X 20mm M6 - 1.0 X 6mm Flat Head Screw Cup Point Set (0002150) Screw (0002246) Centerline Indicator 5 HAVEN PERCH TABLES ASSEMBLY INSTRUCTIONS...
- Page 6 Push together making sure to line up the plastic spline in the groove of each surface. Place the tite joints into the dados in the top and tighten until the surfaces have no gap between them. 6 HAVEN PERCH TABLES ASSEMBLY INSTRUCTIONS...
- Page 7 Leave the screws loose until all screws are in place. Flex the frame into place to align any remaining holes. Tighten all screws to secure the base onto the surface. #10 X 1” Tor x Head Screw (0002147) 7 HAVEN PERCH TABLES ASSEMBLY INSTRUCTIONS...
- Page 8 Screw the hooks to the surface using (2) screws each. #10 X 1” Tor x Head Screw (0002147) 8 HAVEN PERCH TABLES ASSEMBLY INSTRUCTIONS...
Need help?
Do you have a question about the Haven Perch and is the answer not in the manual?
Questions and answers