Table of Contents
Advertisement
Raption 150 Compact Installation Manual
F
Verification
Once completed the entire installation procedure, check the following points:
•
Complete the Commissioning checklist.
•
Check that all the MCB, RCD, Main Circuit Breaker and Disconnectors are powered
on.
•
Check that all safety labels are correctly placed.
•
Close the Charge Point's doors. The Charge Point has a security switch (anti-
tamper protection) installed that will avoid any charging session if the doors are
opened.
•
Check that all beacons are illuminated in green.
•
Verify that each EV connector is in good condition.
•
Make sure the ventilation air flow is correct and there is not any obstruction at the
air inlets and outlets.
•
Check for abnormal noise while charging a vehicle.
G
How to use and configure
In order to use and configure the Charging Station there is an User Manual. To get it,
download it from the Expert Area or send a mail to support@circontrol.com.
Note: Ask Circontrol PS-Support Department in order to register in the Circontrol
Expert Area.
29
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Raption 150 Compact and is the answer not in the manual?