Site Requirements Site Requirements Before the system is installed, make sure your site meets these requirements: Ventilation Fume Hood/ The system must be either connected to a Pressure Regulator The nitrogen supply system must have a Ventilation System ventilation system using the exhaust outlet pressure regulator.
Failure to do so can cause damage to the N port. If you need to move the system within the laboratory or between laboratories in the same building, follow the instructions below. If you need to ship the system, please contact Biotage 1-Point ® Support for instructions.
(earthed). Use only a power cord supplied use compressed air, however Biotage cannot guarantee that by Biotage. The plug should only be connected to a grounded the system will work at full performance, and there might be outlet as per local and national regulations. Keep the mains plug associated risks that are not accounted for.
Technical Specifications Technical Specifications System Ventilation » Dimensions Fume Hood/ 337 x 365 x 451 mm (13.3" x 14.4" x 17.8") Fume hood or equivalent enclosure, or (W X D X H) closed Ventilation System » Connected to a ventilation system via the exhaust outlet.
Safety Safety Intended Use equipment to Biotage, this should be done in accordance with the material return procedures supplied separately by Biotage. TurboVap 96 Dual from Biotage is intended solely for ® concentrating samples for applications in sample preparation, Only use genuine Biotage accessories in the system.
Failure to install or use the system in » Do not place any equipment or bottles a manner specified by Biotage may result in personal injury on top of or above the system. and/or equipment damage. »...
To forward a product for heater it may contaminate future evaporation runs recycling or proper disposal, return them to Biotage Sweden AB. and the gas heater may need to be replaced. »...
Safety Safety in Other Languages A document with translations of the safety chapter is supplied with the system and can also be downloaded at www.biotage. com. If you have problems downloading the safety translations (P/N 418323), please contact your local Biotage representative.
Accessories and Spare Parts Only use genuine Biotage accessories in the system. To order consumables and accessories, see contact information on the back of this document or visit our website www.biotage.com.
Need help?
Do you have a question about the TurboVap 96 Dual and is the answer not in the manual?
Questions and answers