Midea WHT 4.60 IX User Manual page 27

LIGHTING
Replacing the light modules
•
Cannot replaced the light bulbs, the entire light module has to be replaced.
•
When changing the light modules, the contacts are live.
•
Before changing the light module(s), unplug the appliance from the mains or switch
off the circuit breaker in the fuse box.
LED-Lichtmodul demontieren
• Entfernen Sie den Fettfilter und entfernen Sie vorsichtig die 2 Schrauben von der
Frontplatte (zum Entfernen der Schrauben wird ein Kreuzschlitzschraubenzieher
benö tigt).
•
Trennen Sie den Anschluss der LED-Leuchte.
•
Drü cken Sie auf die LED-Leuchte auf der Rü ckseite der Frontplatte, nehmen Sie die
LED- Leuchte heraus.
• Ersetzen Sie die Lampe (handelsü bliche LED-Lampe (max. 1,5 w).
•
Installieren Sie die Lampe wieder im Haubenkö rper.
Reinstall LED light module
•
Press LED light on the front of front plate, install the LED light on the front plate.
•
Connect the terminal of LED light and light leads.
•
Carefully fasten the 2 screws on the front plate, reinstall the grease filter.
power
Self-ballasted
LED modules
DISPOSAL OF OLD ELECTRICAL APPLIANCES
The European directive 2012/19/EU on Waste Electrical and Electronic
Equipment (WEEE), requires that old household electrical appliances
must not be disposed of in the normal unsorted municipal waste stream.
Old appliances must be collected separately to optimize the recovery
and recycling of the materials they contain and reduce the impact on
human health and the environment. The crossed out "wheeled bin"
symbol on the product reminds you of your obligation, that when you
dispose of the appliance, it must be separately collected. Consumers
should contact their local authority or retailer for information concerning
the correct disposal of their old appliance.
Max
Voltage
1.5W DC 12 V
Square / Diameter
: 70mm
picture Lamp Cap
——
10
ILCOS D code
DBS-1.5-S-
33.2/120
DE
EN