Midea WHT 4.60 IX User Manual page 23

Hook the hood body:
•
Hook the hood body to the bracket 20.
•
Level the hood body itself.
•
Remove the filter from the inside of the hood body, fix the screws 10 to Wall Plugs 11 at
the points (3).
Right
CONNECTIONS
DUCTED VERSION AIR EXHAUST SYSTEM
When installing the ducted version, connect the
hood to the chimney using either a flexible or
rigid pipe ɸ 150 or ɸ 120 mm, the choice of which
is left to the installer.
• To install a ɸ 120 mm air exhaust
connection, insert the reducer flange 3
on the hood body outlet.
•
Fix the pipe 4 in position using sufficient
pipe clamps (not supplied).
•
Remove possible charcoal filters.
Wrong
6
DE
EN