Operation Mode Registers - Toshiba PROSEC T3 User Manual

4.2.7

Operation mode registers

The channel 1 operation mode can be set by writing an appropriate data into the
address 32. And the channel 2 operation mode can be set by writing an appropriate
data into the address 33.
Operation mode setting is important to use the PI312. See section 5 for how to set the
operation mode.
The operation mode registers can also be read by READ instruction. It is
recommended to read and check the data after setting the operation mode.
<Channel 1>
F
Address 32
<Channel 2>
F
Address 33
E D C B A
No use (data not defined)
Refer to section 5.3
E D C B A
No use (data not defined)
Refer to section 5.3
9 8 7 6 5
Operation mode data
9 8 7 6 5
Operation mode data
4. Register Configuration
4 3 2 1 0
4 3 2 1 0
User's Manual
43