Toshiba PROSEC T3 User Manual page 24

2. Specifications
2.1 General specifications
Power voltage
Current consumption
Environmental conditions
Insulation resistance
Withstand voltage
Size
Weight
Note (1) The T3's power supply module can supply maximum 7 A of internal 5 Vdc.
Note (2) Between external terminals and internal circuit.
2.2 Functional specifications
Module type
I/O allocation type
Number of pulse input
channels
Counter configuration
Input pulse frequency
Counter operation mode
Pulse count mode
Interrupt function
Hardware comparison
output function
22
Pulse Input Module (PI312)
Item
Check that the internal 5 Vdc current consumption per one power supply
module does not exceed the limit.
Item
Specifications
5 Vdc (supplied from back plane bus)
0.8 A (5 Vdc) maximum
Conforms to T3 specifications
10 MΩ (1000 Vdc)
1500 Vac - 1 minute
T3 I/O module size (1 slot)
500 g
Specifications
Pulse input
iX+Y 2W
2 channels
24-bit, binary counter
Count value = 0 to 16777215
50 kHz maximum
• Quadrature bi-pulse counter
• Up/down pulse counter
• Auto-reset universal counter
• Universal counter
• Speed counter
• Programmable interval timer
• Gate-ON timer
• Slave counter
• Slave timer
• Normal mode (1 count per 1 pulse)
• Precision count mode (both rising and falling
edges)
Interrupt generation for T3 at;
Count value = set-point-1 (counting up)
Count value = set-point-2 (counting down)
2 points for each channel (transistor outputs)
∗S1: ON when Count value > set-point-1
∗S2: ON when Count value < set-point-2
Remarks
Note (1)
Note (2)
Note (2)